com.esri.arcgis.controls
Class TOCControl

java.lang.Object
  java.awt.Component
      java.awt.Canvas
          com.esri.arcgis.interop.Ocx
              com.esri.arcgis.controls.TOCControl

All Implemented Interfaces:

ITOCControl, ITOCControl2, ITOCControlDefault, IConnectionPointContainer, IPersistStreamInit, com.esri.arcgis.interop.RemoteObjRef, IPersist, ISupportErrorInfo, ImageObserver, MenuContainer, Serializable, Accessible

public class TOCControl
extends com.esri.arcgis.interop.Ocx
implements com.esri.arcgis.interop.RemoteObjRef, ITOCControlDefault, ITOCControl, ITOCControl2, IConnectionPointContainer, IPersistStreamInit, IPersist, ISupportErrorInfo

ESRI TOCControl

Description

The TOCControl displays a 'Table of Contents' view of maps, layers and layer symbology available from the IActiveView and IBasicMap interfaces. The TOCControl works in conjunction with a 'buddy' control or an object implementing IActiveView. A MapControl, PageLayoutControl, SceneControl or GlobeControl can be a 'buddy'. The TOCControl obtains access to the 'buddy' through the ITOCBuddy interface. The TOCControl manages layer visibility and label editing.

Remarks

There is no need to declare the TOCControl's outbound interface as described below in most development environments, because the interface is automaticlly implemented.

Product Availability

Available with ArcGIS Engine.

See Also:

Serialized Form

Nested Class Summary

Nested classes/interfaces inherited from class java.awt.Canvas

Canvas.AccessibleAWTCanvas

Nested classes/interfaces inherited from class java.awt.Component

Component.AccessibleAWTComponent, Component.BaselineResizeBehavior, Component.BltBufferStrategy, Component.FlipBufferStrategy

Field Summary

Fields inherited from class com.esri.arcgis.interop.Ocx

rootParentContainers, rootWindows

Fields inherited from class java.awt.Component

BOTTOM_ALIGNMENT, CENTER_ALIGNMENT, LEFT_ALIGNMENT, RIGHT_ALIGNMENT, TOP_ALIGNMENT

Fields inherited from interface java.awt.image.ImageObserver

ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

Constructor Summary

TOCControl()
Constructs a TOCControl using ArcGIS Engine.

TOCControl(Object o)
Constructs a TOCControl.

Method Summary

void	aboutBox() Displays a dialog of information about the TOCControl.
void	addITOCControlEventsListener(ITOCControlEvents theListener) addITOCControlEventsListener.
void	addNotify()
void	enumConnectionPoints(IEnumConnectionPoints[] ppEnum) enumConnectionPoints
boolean	equals(Object o) Compare this object with another
boolean	esri_isEnabled() Indicates whether the TOCControl can respond to user generated events.
void	esri_setEnabled(boolean rhs1) Indicates whether the TOCControl can respond to user generated events.
void	findConnectionPoint(GUID riid, IConnectionPoint[] ppCP) findConnectionPoint
IActiveView	getActiveView() The ActiveView used to populate the TOCControl.
int	getAppearance() The appearance of the TOCControl.
int	getBorderStyle() The border style of the TOCControl.
Object	getBuddy() The object whose ActiveView is used to populate the TOCControl.
void	getClassID(GUID[] pClassID) getClassID
static String	getClsid() getClsid.
Object	getCustomProperty() A property to associate data with a control.
int	getHWnd() Handle to the window associated with the TOCControl.
int	getKeyIntercept() A property that specifies interception of key strokes that are normally handled by the container.
int	getLabelEdit() Label editing state.
int	getLayerVisibilityEdit() Layer visibility editing state.
Picture	getMouseIcon() Custom mouse icon used if MousePointer is 99.
int	getMousePointer() The mouse pointer displayed over the TOCControl.
Object	getObject() A property that returns the underlying control.
void	getSelectedItem(int[] itemType, IBasicMap[] basicMap, ILayer[] layer, Object[] unk, Object[] data) Returns the selected item in the TOCControl.
void	getSizeMax(_ULARGE_INTEGER[] pCbSize) getSizeMax
void	hitTest(int x, int y, int[] itemType, IBasicMap[] basicMap, ILayer[] layer, Object[] unk, Object[] data) Returns the item in the TOCControl at the specified coordinates.
void	initNew() initNew
void	interfaceSupportsErrorInfo(GUID riid) interfaceSupportsErrorInfo
void	isDirty() isDirty
boolean	isEnableLayerDragDrop() Indicates if layers can be dragged and dropped in the control.
void	load(IStream pStm) load
void	removeITOCControlEventsListener(ITOCControlEvents theListener) removeITOCControlEventsListener.
void	save(IStream pStm, int fClearDirty) save
void	selectItem(Object unk, Object data) Sets the selected item in the TOCControl.
void	setActiveView(IActiveView activeView) Sets the ActiveView used to populate the TOCControl.
void	setAppearance(int rhs1) The appearance of the TOCControl.
void	setBorderStyle(int rhs1) The border style of the TOCControl.
void	setBuddyControl(Object pTOCBuddy) Sets a control to be a buddy of the toolbar, this control must support ITOCBuddy.
void	setCustomProperty(Object rhs1) A property to associate data with a control.
void	setEnableLayerDragDrop(boolean rhs1) Indicates if layers can be dragged and dropped in the control.
void	setKeyIntercept(int rhs1) A property that specifies interception of key strokes that are normally handled by the container.
void	setLabelEdit(int rhs1) Label editing state.
void	setLayerVisibilityEdit(int rhs1) Layer visibility editing state.
void	setMouseIconByRef(Picture rhs1) Custom mouse icon used if MousePointer is 99.
void	setMousePointer(int rhs1) The mouse pointer displayed over the TOCControl.
void	update() Updates the contents of the TOCControl to match its ActiveView.

Methods inherited from class com.esri.arcgis.interop.Ocx

checkIfVisible, getCanvasWindowHandle, getControlWindowHandle, getMinimumSize, getObjRef, getPreferredSize, paint, removeNotify, setBounds, setBounds, setSize, setSize, zz_doQueuedSets, zz_get, zz_get, zz_get, zz_get, zz_get, zz_get, zz_get, zz_get, zz_queueSet, zz_queueSet, zz_queueSet, zz_queueSet, zz_queueSet, zz_queueSet, zz_queueSet, zz_queueSet

Methods inherited from class java.awt.Canvas

createBufferStrategy, createBufferStrategy, getAccessibleContext, getBufferStrategy, update

Methods inherited from class java.awt.Component

action, add, addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addInputMethodListener, addKeyListener, addMouseListener, addMouseMotionListener, addMouseWheelListener, addPropertyChangeListener, addPropertyChangeListener, applyComponentOrientation, areFocusTraversalKeysSet, bounds, checkImage, checkImage, coalesceEvents, contains, contains, createImage, createImage, createVolatileImage, createVolatileImage, deliverEvent, disable, disableEvents, dispatchEvent, doLayout, enable, enable, enableEvents, enableInputMethods, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, getAlignmentX, getAlignmentY, getBackground, getBaseline, getBaselineResizeBehavior, getBounds, getBounds, getColorModel, getComponentAt, getComponentAt, getComponentListeners, getComponentOrientation, getCursor, getDropTarget, getFocusCycleRootAncestor, getFocusListeners, getFocusTraversalKeys, getFocusTraversalKeysEnabled, getFont, getFontMetrics, getForeground, getGraphics, getGraphicsConfiguration, getHeight, getHierarchyBoundsListeners, getHierarchyListeners, getIgnoreRepaint, getInputContext, getInputMethodListeners, getInputMethodRequests, getKeyListeners, getListeners, getLocale, getLocation, getLocation, getLocationOnScreen, getMaximumSize, getMouseListeners, getMouseMotionListeners, getMousePosition, getMouseWheelListeners, getName, getParent, getPeer, getPropertyChangeListeners, getPropertyChangeListeners, getSize, getSize, getToolkit, getTreeLock, getWidth, getX, getY, gotFocus, handleEvent, hasFocus, hide, imageUpdate, inside, invalidate, isBackgroundSet, isCursorSet, isDisplayable, isDoubleBuffered, isEnabled, isFocusable, isFocusCycleRoot, isFocusOwner, isFocusTraversable, isFontSet, isForegroundSet, isLightweight, isMaximumSizeSet, isMinimumSizeSet, isOpaque, isPreferredSizeSet, isShowing, isValid, isVisible, keyDown, keyUp, layout, list, list, list, list, list, locate, location, lostFocus, minimumSize, mouseDown, mouseDrag, mouseEnter, mouseExit, mouseMove, mouseUp, move, nextFocus, paintAll, paramString, postEvent, preferredSize, prepareImage, prepareImage, print, printAll, processComponentEvent, processEvent, processFocusEvent, processHierarchyBoundsEvent, processHierarchyEvent, processInputMethodEvent, processKeyEvent, processMouseEvent, processMouseMotionEvent, processMouseWheelEvent, remove, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, removeMouseWheelListener, removePropertyChangeListener, removePropertyChangeListener, repaint, repaint, repaint, repaint, requestFocus, requestFocus, requestFocusInWindow, requestFocusInWindow, reshape, resize, resize, setBackground, setComponentOrientation, setCursor, setDropTarget, setEnabled, setFocusable, setFocusTraversalKeys, setFocusTraversalKeysEnabled, setFont, setForeground, setIgnoreRepaint, setLocale, setLocation, setLocation, setMaximumSize, setMinimumSize, setName, setPreferredSize, setVisible, show, show, size, toString, transferFocus, transferFocusBackward, transferFocusUpCycle, validate

Methods inherited from class java.lang.Object

clone, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface com.esri.arcgis.interop.RemoteObjRef

getJintegraDispatch, release

Constructor Detail

TOCControl

public TOCControl()

Constructs a TOCControl using ArcGIS Engine.

TOCControl

public TOCControl(Object o)

Constructs a TOCControl.

Method Detail

getClsid

public static String getClsid()

getClsid.

equals

public boolean equals(Object o)

Compare this object with another

Overrides:

equals in class Object

addITOCControlEventsListener

public void addITOCControlEventsListener(ITOCControlEvents theListener)
                                  throws IOException

addITOCControlEventsListener. Listen to events generated by this class.

Parameters:

theListener - An object that implements the com.esri.arcgis.controls.ITOCControlEvents interface.

Throws:

IOException - If there are communications problems.

removeITOCControlEventsListener

public void removeITOCControlEventsListener(ITOCControlEvents theListener)
                                     throws IOException

removeITOCControlEventsListener. Stop listening to events generated by this class.

Parameters:

theListener - An object that implements the com.esri.arcgis.controls.ITOCControlEvents interface.

Throws:

IOException - If there are communications problems.

addNotify

public void addNotify()

Overrides:

addNotify in class com.esri.arcgis.interop.Ocx

esri_setEnabled

public void esri_setEnabled(boolean rhs1)
                     throws IOException,
                            AutomationException

Indicates whether the TOCControl can respond to user generated events.

Product Availability

Available with ArcGIS Engine.

Specified by:

esri_setEnabled in interface ITOCControl

Specified by:

esri_setEnabled in interface ITOCControlDefault

Parameters:

rhs1 - The rhs1 (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

esri_isEnabled

public boolean esri_isEnabled()
                       throws IOException,
                              AutomationException

Indicates whether the TOCControl can respond to user generated events.

Product Availability

Available with ArcGIS Engine.

Specified by:

esri_isEnabled in interface ITOCControl

Specified by:

esri_isEnabled in interface ITOCControlDefault

Returns:

The returnValue

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getHWnd

public int getHWnd()
            throws IOException,
                   AutomationException

Handle to the window associated with the TOCControl.

Description

The operating environment identifies each window, form and control in an application by assigning it a handle, or hWnd. Many ArcObjects methods and Windows API calls require the hWnd as an argument.

Product Availability

Available with ArcGIS Engine.

Specified by:

getHWnd in interface ITOCControl

Specified by:

getHWnd in interface ITOCControlDefault

Returns:

The returnValue

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setMousePointer

public void setMousePointer(int rhs1)
                     throws IOException,
                            AutomationException

The mouse pointer displayed over the TOCControl.

Product Availability

Available with ArcGIS Engine.

Specified by:

setMousePointer in interface ITOCControl

Specified by:

setMousePointer in interface ITOCControlDefault

Parameters:

rhs1 - A com.esri.arcgis.controls.esriControlsMousePointer constant (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getMousePointer

public int getMousePointer()
                    throws IOException,
                           AutomationException

The mouse pointer displayed over the TOCControl.

Description

Use this property when you want to indicate changes in functionality as the mouse pointer passes over the TOCControl. The esriPointerArrowHourglass setting (11) is useful for indicating that the user should wait for a process or operation to finish.

Product Availability

Available with ArcGIS Engine.

Specified by:

getMousePointer in interface ITOCControl

Specified by:

getMousePointer in interface ITOCControlDefault

Returns:

A com.esri.arcgis.controls.esriControlsMousePointer constant

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setMouseIconByRef

public void setMouseIconByRef(Picture rhs1)
                       throws IOException,
                              AutomationException

Custom mouse icon used if MousePointer is 99.

Product Availability

Available with ArcGIS Engine.

Specified by:

setMouseIconByRef in interface ITOCControl

Specified by:

setMouseIconByRef in interface ITOCControlDefault

Parameters:

rhs1 - A reference to a com.esri.arcgis.support.ms.stdole.Picture (A com.esri.arcgis.support.ms.stdole.Picture COM typedef) (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getMouseIcon

public Picture getMouseIcon()
                     throws IOException,
                            AutomationException

Custom mouse icon used if MousePointer is 99.

Description

The MouseIcon property provides a custom icon that is used when the MousePointer property is set to esriPointerArrowHourglass (99).

Remarks

In most development evironments the control's property pages can be used to load either a cursor (.cur) or icon (.ico) file. A cursor contains a custom 'hotspot' location and can be any size. The 'hotspot' location for an icon file defaults to the center of the icon. This property cannot be used to load animated cursor (.ani) files.

To programatically create an object implementing IPictureDisp there is the win32 function OleLoadPicture or helper methods depending on the development environment.

Product Availability

Available with ArcGIS Engine.

Specified by:

getMouseIcon in interface ITOCControl

Specified by:

getMouseIcon in interface ITOCControlDefault

Returns:

A reference to a com.esri.arcgis.support.ms.stdole.Picture (A com.esri.arcgis.support.ms.stdole.Picture COM typedef)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getAppearance

public int getAppearance()
                  throws IOException,
                         AutomationException

The appearance of the TOCControl.

Description

Returns or sets the paint style of a TOCControl to either Flat or 3D. By default the appearance is flat.

Product Availability

Available with ArcGIS Engine.

Specified by:

getAppearance in interface ITOCControl

Specified by:

getAppearance in interface ITOCControlDefault

Returns:

A com.esri.arcgis.controls.esriControlsAppearance constant

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setAppearance

public void setAppearance(int rhs1)
                   throws IOException,
                          AutomationException

The appearance of the TOCControl.

Product Availability

Available with ArcGIS Engine.

Specified by:

setAppearance in interface ITOCControl

Specified by:

setAppearance in interface ITOCControlDefault

Parameters:

rhs1 - A com.esri.arcgis.controls.esriControlsAppearance constant (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setBorderStyle

public void setBorderStyle(int rhs1)
                    throws IOException,
                           AutomationException

The border style of the TOCControl.

Product Availability

Available with ArcGIS Engine.

Specified by:

setBorderStyle in interface ITOCControl

Specified by:

setBorderStyle in interface ITOCControlDefault

Parameters:

rhs1 - A com.esri.arcgis.controls.esriControlsBorderStyle constant (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getBorderStyle

public int getBorderStyle()
                   throws IOException,
                          AutomationException

The border style of the TOCControl.

Description

Returns or sets the border style of a TOCControl. By default a border is drawn.

Product Availability

Available with ArcGIS Engine.

Specified by:

getBorderStyle in interface ITOCControl

Specified by:

getBorderStyle in interface ITOCControlDefault

Returns:

A com.esri.arcgis.controls.esriControlsBorderStyle constant

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

aboutBox

public void aboutBox()
              throws IOException,
                     AutomationException

Displays a dialog of information about the TOCControl.

Description

The AboutBox method causes a modal dialog box to display on top of the TOCControl, containing information about the version and creation date of the TOCControl as well as listing relevant legal and copyright information from ESRI.

Product Availability

Available with ArcGIS Engine.

Specified by:

aboutBox in interface ITOCControl

Specified by:

aboutBox in interface ITOCControlDefault

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getActiveView

public IActiveView getActiveView()
                          throws IOException,
                                 AutomationException

The ActiveView used to populate the TOCControl.

Description

This is the ActiveView of the Buddy that is used by the TOCControl to populate itself with maps, layers and symbols. The ActiveView is set by the SetBuddyControl or SetActiveView methods.

Product Availability

Available with ArcGIS Engine.

Specified by:

getActiveView in interface ITOCControl

Specified by:

getActiveView in interface ITOCControlDefault

Returns:

A reference to a com.esri.arcgis.carto.IActiveView

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getBuddy

public Object getBuddy()
                throws IOException,
                       AutomationException

The object whose ActiveView is used to populate the TOCControl.

Description

The Buddy returns the object implementing ITOCBuddy that was passed to the SetBuddyControl method. The Buddy is responsible for handling the ActiveView, and enables the TOCControl to populate itself with maps, layers and symbols.

The SetBuddyControl method will remove any wrapper object that a development environment has added to the control passed to it. As such, the object passed into the SetBuddyControl method may be different from the object returned by the Buddy.

Product Availability

Available with ArcGIS Engine.

Specified by:

getBuddy in interface ITOCControl

Specified by:

getBuddy in interface ITOCControlDefault

Returns:

A reference to another Automation Object (IDispatch)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

hitTest

public void hitTest(int x,
                    int y,
                    int[] itemType,
                    IBasicMap[] basicMap,
                    ILayer[] layer,
                    Object[] unk,
                    Object[] data)
             throws IOException,
                    AutomationException

Returns the item in the TOCControl at the specified coordinates.

Description

x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the TOCControl (the top left hand corner).

y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the TOCControl (the top left hand corner).

ItemType specifies an enumeration indicating the type of item (none, map, layer, heading or legend class).

Map specifies an IMap object.

Layer specifies an ILayer object.

Unk specifies an ILegendGroup object.

Data specifies a long indicating the index of the legend class within the legend group. Use this index in conjunction with the legend group to obtain a particular legend class. An index of -1 refers to the heading if it is present.

Product Availability

Available with ArcGIS Engine.

Specified by:

hitTest in interface ITOCControl

Specified by:

hitTest in interface ITOCControlDefault

Parameters:

x - The x (in)

y - The y (in)

itemType - A com.esri.arcgis.controls.esriTOCControlItem constant (in/out: use single element array)

basicMap - A reference to a com.esri.arcgis.carto.IBasicMap (in/out: use single element array)

layer - A reference to a com.esri.arcgis.carto.ILayer (in/out: use single element array)

unk - A reference to another Object (IUnknown) (in/out: use single element array)

data - A Variant (in/out: use single element array)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

update

public void update()
            throws IOException,
                   AutomationException

Updates the contents of the TOCControl to match its ActiveView.

Description

Updates the contents of the TOCControl based upon the ActiveView. Use the Update method after programmatically changing layer visibility and names, or changing any legend settings.

Remarks

The TOCControl will automatically update its contents in response to IActiveViewEvents fired from the Buddy and the ITOCBuddyEvents::ActiveViewReplaced event that indicates a new document has been loaded into the Buddy or the object encapsulated by the Buddy has been replaced.

Use the Update method to update a Map which is not the FocusMap, as the IActiveViewEvents will only be triggered for the FocusMap.

Product Availability

Available with ArcGIS Engine.

Specified by:

update in interface ITOCControl

Specified by:

update in interface ITOCControlDefault

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setActiveView

public void setActiveView(IActiveView activeView)
                   throws IOException,
                          AutomationException

Sets the ActiveView used to populate the TOCControl.

Description

Use the method to set the ActiveView used by the TOCControl to populate itself with maps, layers and symbols. The ActiveView can be set to IMapControl2::ActiveView, IPageLayoutControl::ActiveView, ISceneControl::Scene or IGlobeControl::Globe. The SetActiveView method causes the Buddy to be set to Nothing.

Remarks

If a Buddy has been set the TOCControl will populate itself based on the ActiveView of the Buddy.

Product Availability

Available with ArcGIS Engine.

Specified by:

setActiveView in interface ITOCControl

Specified by:

setActiveView in interface ITOCControlDefault

Parameters:

activeView - A reference to a com.esri.arcgis.carto.IActiveView (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getLayerVisibilityEdit

public int getLayerVisibilityEdit()
                           throws IOException,
                                  AutomationException

Layer visibility editing state.

Description

Use LabelVisibilityEdit to determine whether layer visibility is controlled programmatically or through user interaction with the check boxes. By default LayerVisibility is automatic.

Set the property to automatic to toggle layer visibility through user interaction with the check boxes.

Set the property to manual to toggle layer visibility programmatcially.

Remarks

If a layer has MinimumScale and MaximumScale thresholds set, its check box will become disabled when the layer is not displayed.

Product Availability

Available with ArcGIS Engine.

Specified by:

getLayerVisibilityEdit in interface ITOCControl

Specified by:

getLayerVisibilityEdit in interface ITOCControlDefault

Returns:

A com.esri.arcgis.controls.esriTOCControlEdit constant

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setLayerVisibilityEdit

public void setLayerVisibilityEdit(int rhs1)
                            throws IOException,
                                   AutomationException

Layer visibility editing state.

Product Availability

Available with ArcGIS Engine.

Specified by:

setLayerVisibilityEdit in interface ITOCControl

Specified by:

setLayerVisibilityEdit in interface ITOCControlDefault

Parameters:

rhs1 - A com.esri.arcgis.controls.esriTOCControlEdit constant (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getLabelEdit

public int getLabelEdit()
                 throws IOException,
                        AutomationException

Label editing state.

Description

Use LabelEdit to determine whether label editing is controlled programmatically or through user interaction. By default label editing is automatic. To edit a map, layer, heading or legend class label, click on it at runtime, and then click on it a second time to invoke label editing. The ESC key on the keyboard can be used during the edit to cancel the LabelEdit.

Set the property to automatic to edit labels unchecked, and set to manual to trigger the OnBeginLabelEdit and OnEndLabelEdit events.

Product Availability

Available with ArcGIS Engine.

Specified by:

getLabelEdit in interface ITOCControl

Specified by:

getLabelEdit in interface ITOCControlDefault

Returns:

A com.esri.arcgis.controls.esriTOCControlEdit constant

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setLabelEdit

public void setLabelEdit(int rhs1)
                  throws IOException,
                         AutomationException

Label editing state.

Product Availability

Available with ArcGIS Engine.

Specified by:

setLabelEdit in interface ITOCControl

Specified by:

setLabelEdit in interface ITOCControlDefault

Parameters:

rhs1 - A com.esri.arcgis.controls.esriTOCControlEdit constant (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getCustomProperty

public Object getCustomProperty()
                         throws IOException,
                                AutomationException

A property to associate data with a control.

Description

Use the CustomProperty to associate any useful data with the TOCControl. This is similar to a 'Tag' property, and can be use to store strings, numbers and objects.

Product Availability

Available with ArcGIS Engine.

Specified by:

getCustomProperty in interface ITOCControl

Specified by:

getCustomProperty in interface ITOCControlDefault

Returns:

A Variant

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setCustomProperty

public void setCustomProperty(Object rhs1)
                       throws IOException,
                              AutomationException

A property to associate data with a control.

Product Availability

Available with ArcGIS Engine.

Specified by:

setCustomProperty in interface ITOCControl

Specified by:

setCustomProperty in interface ITOCControlDefault

Parameters:

rhs1 - A Variant (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setBuddyControl

public void setBuddyControl(Object pTOCBuddy)
                     throws IOException,
                            AutomationException

Sets a control to be a buddy of the toolbar, this control must support ITOCBuddy.

Description

Pass the SetBuddyControl method a MapControl, PageLayoutControl, SceneControl, GlobeControl or object implementing ITOCBuddy whose ActiveView is passed to the TOCControl to enable it to populate itself with maps, layers and symbols. By default no buddy is set. To clear the Buddy set the property to Nothing.

Product Availability

Available with ArcGIS Engine.

Specified by:

setBuddyControl in interface ITOCControl

Specified by:

setBuddyControl in interface ITOCControlDefault

Parameters:

pTOCBuddy - A reference to another Automation Object (IDispatch) (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getObject

public Object getObject()
                 throws IOException,
                        AutomationException

A property that returns the underlying control. This can be used when the control is inside a wrapper object that has been added by a development environment.

Description

In some development environments it is not possible to query interface directly on the control to other COM interfaces, beacuse the control is contained within a wrapper object. To get the real control use the Object property.

Product Availability

Available with ArcGIS Engine.

Specified by:

getObject in interface ITOCControl

Specified by:

getObject in interface ITOCControlDefault

Returns:

A reference to another Automation Object (IDispatch)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getKeyIntercept

public int getKeyIntercept()
                    throws IOException,
                           AutomationException

A property that specifies interception of key strokes that are normally handled by the container. When intercepted the OnKeyDown and OnKeyUp events will be called. This value can be a combined bit mask of esriKeyIntercept enum values.

Description

Returns or sets keys on the keyboard that will be intercepted by the TOCControl, triggering the OnKeyDown and OnKeyUp events when pressed. These keys are often hidden from the TOCControl by the development environment container. By default the KeyIntercept is set to esriKeyInterceptNone.

Many development environment containers use the up, down, left and right arrow keys to change control focus on a form. These keys can also be useful for navigating around the display. To intercept the arrow keys and the Tab key combine the enum values using a logical OR operation (esriKeyInterceptArrowKeys OR esriKeyInterceptTabKey, which is 1 OR 4 = 5).

Product Availability

Available with ArcGIS Engine.

Specified by:

getKeyIntercept in interface ITOCControl

Specified by:

getKeyIntercept in interface ITOCControlDefault

Returns:

The returnValue

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setKeyIntercept

public void setKeyIntercept(int rhs1)
                     throws IOException,
                            AutomationException

A property that specifies interception of key strokes that are normally handled by the container. When intercepted the OnKeyDown and OnKeyUp events will be called. This value can be a combined bit mask of esriKeyIntercept enum values.

Product Availability

Available with ArcGIS Engine.

Specified by:

setKeyIntercept in interface ITOCControl

Specified by:

setKeyIntercept in interface ITOCControlDefault

Parameters:

rhs1 - The rhs1 (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

isEnableLayerDragDrop

public boolean isEnableLayerDragDrop()
                              throws IOException,
                                     AutomationException

Indicates if layers can be dragged and dropped in the control.

Description

Determines whether layers can be dragged and dropped in the TOCControl. This property if false by default. When EnableLayerDragDrap is true, layers can be dragged and dropped as follows:

• within a map
• within, to and from a group layer
• between maps
• between maps in different TOCControl's
• between maps in different TOCControl's in different application
• between ArcMap and ArcCatalog and a TOCControl

By default when dragging and dropping a layer within a map, the layer will be moved within the map to the drop location. To copy the layer, rather than move it press the CTRL key while dragging and dropping.

By default when dragging and dropping a layer between maps, a copy of the layer will be added into the map the layer is dropped into. To move the dragged layer, rather than copy it press the CTRL key while dragging and dropping.

Remarks

Layers can not be dragged and dropped in the following cases:

• When the Buddy of a TOCControl does not suppport a layer type. For example, a TIN layer cannot be dropped into a TOCControl buddied to a GlobeControl, because a GlobeControl does not support TIN layers.
• When the layer is a child of a composite layer, that does not support IGroupLayer. For example, the child layers of a MapServerLayer have their order fixed by the server and cannot be reordered using drag and drop.

Product Availability

Available with ArcGIS Engine.

Specified by:

isEnableLayerDragDrop in interface ITOCControl2

Specified by:

isEnableLayerDragDrop in interface ITOCControlDefault

Returns:

The returnValue

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

setEnableLayerDragDrop

public void setEnableLayerDragDrop(boolean rhs1)
                            throws IOException,
                                   AutomationException

Indicates if layers can be dragged and dropped in the control.

Product Availability

Available with ArcGIS Engine.

Specified by:

setEnableLayerDragDrop in interface ITOCControl2

Specified by:

setEnableLayerDragDrop in interface ITOCControlDefault

Parameters:

rhs1 - The rhs1 (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getSelectedItem

public void getSelectedItem(int[] itemType,
                            IBasicMap[] basicMap,
                            ILayer[] layer,
                            Object[] unk,
                            Object[] data)
                     throws IOException,
                            AutomationException

Returns the selected item in the TOCControl.

Description

Returns the selected item in the TOCControl. The selected item may have been selected interactively by the end user clicking on the TOCControl or programmatically using the SelectItem method.

ItemType specifies an enumeration indicating the type of item (none, map, layer, heading or legend class).

Map specifies an IMap object.

Layer specifies an ILayer object.

Unk specifies an ILegendGroup object.

Data specifies a long indicating the index of the legend class within the legend group. Use this index in conjunction with the legend group to obtain a particular legend class. An index of -1 refers to the heading if it is present.

Product Availability

Available with ArcGIS Engine.

Specified by:

getSelectedItem in interface ITOCControl2

Specified by:

getSelectedItem in interface ITOCControlDefault

Parameters:

itemType - A com.esri.arcgis.controls.esriTOCControlItem constant (in/out: use single element array)

basicMap - A reference to a com.esri.arcgis.carto.IBasicMap (in/out: use single element array)

layer - A reference to a com.esri.arcgis.carto.ILayer (in/out: use single element array)

unk - A reference to another Object (IUnknown) (in/out: use single element array)

data - A Variant (in/out: use single element array)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

selectItem

public void selectItem(Object unk,
                       Object data)
                throws IOException,
                       AutomationException

Sets the selected item in the TOCControl.

Description

Selects the specified item in the TOCControl. The selected item will appear blue when the TOCControl has keyboard focus and grey when the TOCControl does not have keyboard focus.

Unk specifies an IMap object, and ILayer object or and ILegendGroup object.

Data specifies a long indicating the index of the legend class within the legend group. Use this index in conjunction with the legend group to obtain a particular legend class.

To select an ILegendGroup::Heading either just pass an ILegendGroup object or pass an ILegendGroup object with an index of -1. To select a legend class within the LegendGroup pass an ILegendGroup object with a valid index.

Product Availability

Available with ArcGIS Engine.

Specified by:

selectItem in interface ITOCControl2

Specified by:

selectItem in interface ITOCControlDefault

Parameters:

unk - A reference to another Object (IUnknown) (in)

data - A Variant (in, optional, pass null if not required)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

enumConnectionPoints

public void enumConnectionPoints(IEnumConnectionPoints[] ppEnum)
                          throws IOException,
                                 AutomationException

enumConnectionPoints

Description

IConnectionPointContainer is a Microsoft interface. Please refer to MSDN for information about this interface.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

enumConnectionPoints in interface IConnectionPointContainer

Parameters:

ppEnum - A reference to a com.esri.arcgis.display.IEnumConnectionPoints (out: use single element array)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

findConnectionPoint

public void findConnectionPoint(GUID riid,
                                IConnectionPoint[] ppCP)
                         throws IOException,
                                AutomationException

findConnectionPoint

Description

IConnectionPointContainer is a Microsoft interface. Please refer to MSDN for information about this interface.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

findConnectionPoint in interface IConnectionPointContainer

Parameters:

riid - A Structure: com.esri.arcgis.support.ms.stdole.GUID (in)

ppCP - A reference to a com.esri.arcgis.display.IConnectionPoint (out: use single element array)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

isDirty

public void isDirty()
             throws IOException,
                    AutomationException

isDirty

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

isDirty in interface IPersistStreamInit

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

load

public void load(IStream pStm)
          throws IOException,
                 AutomationException

load

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

load in interface IPersistStreamInit

Parameters:

pStm - A reference to a com.esri.arcgis.system.IStream (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

save

public void save(IStream pStm,
                 int fClearDirty)
          throws IOException,
                 AutomationException

save

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

save in interface IPersistStreamInit

Parameters:

pStm - A reference to a com.esri.arcgis.system.IStream (in)

fClearDirty - The fClearDirty (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getSizeMax

public void getSizeMax(_ULARGE_INTEGER[] pCbSize)
                throws IOException,
                       AutomationException

getSizeMax

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

getSizeMax in interface IPersistStreamInit

Parameters:

pCbSize - A Structure: com.esri.arcgis.system._ULARGE_INTEGER (out: use single element array)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

initNew

public void initNew()
             throws IOException,
                    AutomationException

initNew

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

initNew in interface IPersistStreamInit

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

getClassID

public void getClassID(GUID[] pClassID)
                throws IOException,
                       AutomationException

getClassID

Description

IPersist is a Microsoft interface. Please refer to MSDN for information about this interface.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

getClassID in interface IPersist

Parameters:

pClassID - A Structure: com.esri.arcgis.support.ms.stdole.GUID (out: use single element array)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

interfaceSupportsErrorInfo

public void interfaceSupportsErrorInfo(GUID riid)
                                throws IOException,
                                       AutomationException

interfaceSupportsErrorInfo

Description

Indicates whether the interface supports IErrorInfo.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:

interfaceSupportsErrorInfo in interface ISupportErrorInfo

Parameters:

riid - A Structure: com.esri.arcgis.support.ms.stdole.GUID (in)

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.