com.esri.arcgis.location
Class RSLocator

java.lang.Object
  extended by com.esri.arcgis.location.RSLocator
All Implemented Interfaces:
ILocator, ILocatorDataset, com.esri.arcgis.interop.RemoteObjRef, IAddressCandidates, IAddressCandidates2, IAddressGeocoding, IAddressInputs, IGeocodingProperties, IIntersectionGeocoding, ILocator2, ILocatorImpl, IReverseGeocoding, IReverseGeocodingProperties, IClone, Serializable

public class RSLocator
extends Object
implements com.esri.arcgis.interop.RemoteObjRef, ILocator, ILocator2, ILocatorImpl, ILocatorDataset, IAddressInputs, IAddressGeocoding, IAddressCandidates, IAddressCandidates2, IReverseGeocoding, IReverseGeocodingProperties, IIntersectionGeocoding, IGeocodingProperties, IClone

An address locator that uses the ESRI RouteServer geocoding engine.

Description

This object is new at ArcGIS 9.3.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

See Also:
Serialized Form

Constructor Summary
RSLocator()
          Constructs a RSLocator using ArcGIS Engine.
RSLocator(Object obj)
          Deprecated. As of ArcGIS 9.2, replaced by normal Java casts.
RSLocator theRSLocator = (RSLocator) obj;
 
Method Summary
 void assign(IClone src)
          Assigns the properties of src to the receiver.
 boolean equals(Object o)
          Compare this object with another
 IClone esri_clone()
          Clones the receiver and assigns the result to *clone.
 IArray findAddressCandidates(IPropertySet address)
          Generates candidates for an address.
 IArray findMatchingAddressCandidates(IPropertySet address)
          Generates candidates for an address, including only matching ones.
 IFields getAddressFields()
          Fields needed to geocode a table of addresses.
 Object getBuildTime()
          The date and time the locator was built.
 IFields getCandidateFields()
          Fields contained in a list of candidates.
 String getCategory()
          Category of the locator.
static String getClsid()
          getClsid.
 Object getDefaultInputFieldNames(String addressField)
          Recognized names for an input field.
 String getDescription()
          Description of the locator.
 int getEndOffset()
          End offset percentage.
 ILocatorName getFullName()
          The Name object for the locator.
 IFields getIntersectionCandidateFields()
          Fields contained by intersection candidates.
 String getIntersectionConnectors()
          Connector strings used to designate intersections.
 ILocatorWorkspace getLocatorWorkspace()
          The locator workspace that contains the locator.
 IFields getMatchFields()
          Fields contained in the geocoding result.
 int getMinimumCandidateScore()
          Minimum candidate score setting.
 int getMinimumMatchScore()
          Minimum match score setting.
 String getName()
          Name of the locator.
 IPropertySet getProperties()
          Properties of the locator.
 double getSearchDistance()
          Search distance.
 int getSearchDistanceUnits()
          Units used for the search distance.
 double getSideOffset()
          Side offset distance.
 int getSideOffsetUnits()
          Units used for the side offset.
 int getSpellingSensitivity()
          Spelling sensitivity setting.
 ILocatorUI getUserInterface()
          User interface for the locator.
 int hashCode()
          the hashcode for this object
 boolean isAddPercentAlongToMatchFields()
          Indicates if the percentage along the reference feature at which the address is located is included in the geocoding result.
 boolean isAddReferenceIDToMatchFields()
          Indicates if the feature ID of the matched feature is included in the geocoding result.
 boolean isAddStandardizeStringToMatchFields()
          Indicates if the standardized address is included in the geocoding result.
 boolean isAddXYCoordsToMatchFields()
          Indicates if the x and y coordinates of the address location are included in the geocoding result.
 boolean isEqual(IClone other)
          Indicates if the receiver and other have the same properties.
 boolean isIdentical(IClone other)
          Indicates if the receiver and other are the same object.
 boolean isIntersection(IPropertySet address)
          Indicates if an address is an intersection.
 boolean isMatchIfScoresTie()
          Indicates whether addresses should be arbitrarily matched to a feature when two or more features have the same best score.
 boolean isUseRelativePaths()
          Indicates if the paths to the reference data should be stored relative to the locator.
 IPropertySet matchAddress(IPropertySet address)
          Geocodes a single address.
 void matchTable(ITable addressTable, String addressFieldNames, String whereClause, IFeatureClass outputFeatureClass, String outputFieldNames, IPropertySet fieldsToCopy, ITrackCancel cancelTracker)
          Geocodes a table of addresses.
 IPropertySet reverseGeocode(IPoint location, boolean bReturnIntersection)
          Generate an address based on a point.
 void setAddPercentAlongToMatchFields(boolean bAddPercentAlongToMatchFields)
          Indicates if the percentage along the reference feature at which the address is located is included in the geocoding result.
 void setAddReferenceIDToMatchFields(boolean bAddReferenceIDToMatchFields)
          Indicates if the feature ID of the matched feature is included in the geocoding result.
 void setAddStandardizeStringToMatchFields(boolean bAddStandardizeStringToMatchFields)
          Indicates if the standardized address is included in the geocoding result.
 void setAddXYCoordsToMatchFields(boolean bAddXYCoordsToMatchFields)
          Indicates if the x and y coordinates of the address location are included in the geocoding result.
 void setCategory(String rhs1)
          Category of the locator.
 void setDefaultInputFieldNames(String addressField, Object rhs2)
          Recognized names for a required input field.
 void setDescription(String description)
          Description of the locator.
 void setEndOffset(int endOffset)
          End offset percentage.
 void setIntersectionConnectors(String intersectionConnectors)
          Connector strings used to designate intersections.
 void setMatchIfScoresTie(boolean bMatchIfScoresTie)
          Indicates whether addresses should be arbitrarily matched to a feature when two or more features have the same best score.
 void setMinimumCandidateScore(int minimumCandidateScore)
          Minimum candidate score setting.
 void setMinimumMatchScore(int minimumMatchScore)
          Minimum match score setting.
 void setName(String rhs1)
          Name of the locator.
 void setProperties(IPropertySet props)
          Properties of the locator.
 void setSearchDistance(double searchDistance)
          Search distance.
 void setSearchDistanceUnits(int searchDistanceUnits)
          Units used for the search distance.
 void setSideOffset(double sideOffset)
          Side offset distance.
 void setSideOffsetUnits(int sideOffsetUnits)
          Units used for the side offset.
 void setSpellingSensitivity(int spellingSensitivity)
          Spelling sensitivity setting.
 void setUseRelativePaths(boolean bUseRelativePaths)
          Indicates if the paths to the reference data should be stored relative to the locator.
 void validate()
          Checks that the locator properties and locator dataset are present and valid.
 
Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, toString, wait, wait, wait
 
Methods inherited from interface com.esri.arcgis.interop.RemoteObjRef
getJintegraDispatch, release
 

Constructor Detail

RSLocator

public RSLocator()
          throws IOException,
                 UnknownHostException
Constructs a RSLocator using ArcGIS Engine.

Throws:
IOException - if there are interop problems
UnknownHostException - if there are interop problems

RSLocator

public RSLocator(Object obj)
          throws IOException
Deprecated. As of ArcGIS 9.2, replaced by normal Java casts.
RSLocator theRSLocator = (RSLocator) obj;

Construct a RSLocator using a reference to such an object returned from ArcGIS Engine or Server. This is semantically equivalent to casting obj to RSLocator.

Parameters:
obj - an object returned from ArcGIS Engine or Server
Throws:
IOException - if there are interop problems
Method Detail

getClsid

public static String getClsid()
getClsid.


equals

public boolean equals(Object o)
Compare this object with another

Overrides:
equals in class Object

hashCode

public int hashCode()
the hashcode for this object

Overrides:
hashCode in class Object

getName

public String getName()
               throws IOException,
                      AutomationException
Name of the locator.

Remarks

Locators and locator styles stored in an ArcSDE locator workspace are prefixed by the name of the ArcSDE user that owns the locator styles, as in "SDE.US Streets with Zone".

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getName in interface ILocator
Returns:
The name
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getDescription

public String getDescription()
                      throws IOException,
                             AutomationException
Description of the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getDescription in interface ILocator
Returns:
The description
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setDescription

public void setDescription(String description)
                    throws IOException,
                           AutomationException
Description of the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setDescription in interface ILocator
Parameters:
description - The description (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getCategory

public String getCategory()
                   throws IOException,
                          AutomationException
Category of the locator.

Remarks

The Category property returns a string indicating the category to which the locator belongs. There are two categories that are defined for locators provided with ArcGIS:

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getCategory in interface ILocator
Returns:
The category
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getUserInterface

public ILocatorUI getUserInterface()
                            throws IOException,
                                   AutomationException
User interface for the locator.

Description

The UserInterface property returns an object that you can use to display the user interfaces for the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getUserInterface in interface ILocator
Returns:
A reference to a com.esri.arcgis.geodatabase.ILocatorUI
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getBuildTime

public Object getBuildTime()
                    throws IOException,
                           AutomationException
The date and time the locator was built.

Remarks

The BulidTime property returns the date and time the locator was built.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
getBuildTime in interface ILocator2
Returns:
A Variant
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setName

public void setName(String rhs1)
             throws IOException,
                    AutomationException
Name of the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setName in interface ILocatorImpl
Parameters:
rhs1 - The rhs1 (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setCategory

public void setCategory(String rhs1)
                 throws IOException,
                        AutomationException
Category of the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setCategory in interface ILocatorImpl
Parameters:
rhs1 - The rhs1 (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getProperties

public IPropertySet getProperties()
                           throws IOException,
                                  AutomationException
Properties of the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getProperties in interface ILocatorImpl
Returns:
A reference to a com.esri.arcgis.system.IPropertySet
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setProperties

public void setProperties(IPropertySet props)
                   throws IOException,
                          AutomationException
Properties of the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setProperties in interface ILocatorImpl
Parameters:
props - A reference to a com.esri.arcgis.system.IPropertySet (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getFullName

public ILocatorName getFullName()
                         throws IOException,
                                AutomationException
The Name object for the locator.

Description

Returns a reference to a LocatorName object that represents the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getFullName in interface ILocatorDataset
Returns:
A reference to a com.esri.arcgis.geodatabase.ILocatorName
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
ILocatorName, LocatorName, ILocatorWorkspace.getLocatorName(String)

getLocatorWorkspace

public ILocatorWorkspace getLocatorWorkspace()
                                      throws IOException,
                                             AutomationException
The locator workspace that contains the locator.

Description

Returns a reference to the locator workspace that contains the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getLocatorWorkspace in interface ILocatorDataset
Returns:
A reference to a com.esri.arcgis.geodatabase.ILocatorWorkspace
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
ILocatorWorkspace2, ILocatorManager2, DatabaseLocatorWorkspace, ILocatorWorkspace, ILocatorManager.getLocatorWorkspaceFromPath(String), LocatorEnumerator, ILocatorWorkspaceName2, LocatorWorkspaceName, IDatabaseLocatorWorkspace, LocalLocatorWorkspace, ILocatorManager, LocatorManager, ILocatorWorkspaceName

getAddressFields

public IFields getAddressFields()
                         throws IOException,
                                AutomationException
Fields needed to geocode a table of addresses.

Remarks

The AddressFields property returns a Fields object that specifies the fields that the locator uses to geocode addresses. The IField::Name property of each Field object in the collection is the internal field name used by the locator.

The IField::Required property of each Field indicates whether or not the locator requires this field to geocode addresses. Fields with a Required value of False are not required by the Locator, but may improve the match scores of the addresses.

You can use the Fields returned by this property to determine which fields in a table contain address information using the DefaultInputFieldNames property.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getAddressFields in interface IAddressInputs
Returns:
A reference to a com.esri.arcgis.geodatabase.IFields
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getDefaultInputFieldNames

public Object getDefaultInputFieldNames(String addressField)
                                 throws IOException,
                                        AutomationException
Recognized names for an input field.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
getDefaultInputFieldNames in interface IAddressInputs
Parameters:
addressField - The addressField (in)
Returns:
A Variant
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getMatchFields

public IFields getMatchFields()
                       throws IOException,
                              AutomationException
Fields contained in the geocoding result.

Description

The MatchFields property returns the fields that are created by the address locator for matched addresses.

Remarks

The MatchFields that can be returned by geocoding services included with ArcGIS are:

All address locators based on the address locator styles provided with ArcGIS return the Shape, Status , Score and Match_addr fields.

You can use the fields returned by this property to inspect the match returned by the MatchAddress method, or to define the feature class that is created using the MatchTable method. See the MatchTable method for more information on fields written to the result feature class.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getMatchFields in interface IAddressGeocoding
Returns:
A reference to a com.esri.arcgis.geodatabase.IFields
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
IAddressGeocoding.matchTable(com.esri.arcgis.geodatabase.ITable, String, String, com.esri.arcgis.geodatabase.IFeatureClass, String, com.esri.arcgis.system.IPropertySet, com.esri.arcgis.system.ITrackCancel), IAdvancedGeocoding.rematchTable(com.esri.arcgis.geodatabase.ITable, String, String, com.esri.arcgis.geodatabase.IFeatureClass, String, String, String, com.esri.arcgis.system.ITrackCancel), IAddressGeocoding.matchAddress(com.esri.arcgis.system.IPropertySet), IAddressGeocoding

matchAddress

public IPropertySet matchAddress(IPropertySet address)
                          throws IOException,
                                 AutomationException
Geocodes a single address.

Remarks

The address parameter is a PropertySet that contains the components of the address that you want to match. The property names in this PropertySet are defined by the IAddressInputs::AddressFields property.

The PropertySet returned by this method contains properties defined by the MatchFields property.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
matchAddress in interface IAddressGeocoding
Parameters:
address - A reference to a com.esri.arcgis.system.IPropertySet (in)
Returns:
A reference to a com.esri.arcgis.system.IPropertySet
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
IAddressGeocoding.matchTable(com.esri.arcgis.geodatabase.ITable, String, String, com.esri.arcgis.geodatabase.IFeatureClass, String, com.esri.arcgis.system.IPropertySet, com.esri.arcgis.system.ITrackCancel), IAdvancedGeocoding.rematchTable(com.esri.arcgis.geodatabase.ITable, String, String, com.esri.arcgis.geodatabase.IFeatureClass, String, String, String, com.esri.arcgis.system.ITrackCancel), IAddressGeocoding.matchAddress(com.esri.arcgis.system.IPropertySet), IAddressGeocoding

matchTable

public void matchTable(ITable addressTable,
                       String addressFieldNames,
                       String whereClause,
                       IFeatureClass outputFeatureClass,
                       String outputFieldNames,
                       IPropertySet fieldsToCopy,
                       ITrackCancel cancelTracker)
                throws IOException,
                       AutomationException
Geocodes a table of addresses.

Description

The MatchTable method geocodes a table of addresses to a feature class.

Remarks

Before you geocode a table of addresses, you must first create the feature class that will contain the geocoded features. In addition to having an ObjectID and the match fields created by the locator, you can also specify fields from the address table to copy to the geocoded feature class. When you geocode a table of addresses using ArcGIS Desktop, the output feature class contains two copies of the address fields from the address table. One copy is a static copy that contains the original values of the address components from the address table. The second copy is an editable copy that you can use to modify the address when rematching the geocoded feature class. The names of the latter set of address fields are prefixed with "ARC_". In general, it is a good idea to follow this pattern when programatically geocoding a table of addresses, since the locator that you attach to the geocoded feature class will then only need to refer to the geocoded feature class itself (and not the original address table) in order to be able to rematch the addresses in the geocoded feature class.

The addressFieldNames parameter is used to specify the names of the fields in the addressTable that contain address information. The field names are contained in a comma-delimited string, in the order required by the address locator. You can get the set of address fields for the geocoding service using IAddressInputs::AddressFields. Use the IField::Required property to determine which address fields are required by the address locator. You must specify the names of the required fields in the address table. If your address table does not contain an optional address field, then do not specify a name in the this property.

The WhereClause parameter is used to restrict which addresses in the table are geocoded using a query.

The outputFeatureClass parameter is the feature class which will contain the geocoded addresses. This feature class must have an ObjectID field, and the match fields for the address locator. Use the MatchFields property to get the match fields for the address locator. In addition to the fields returned from MatchFields property, the result feature class also contains the Match_type field indicating how an adddress was matched. The field may contain the following values assigned by IAddressGeocoding::MatchTable or IAddressUI::RematchTable

If you want to copy any additional fields from the address table, or create new fields in the feature class, you must also add them to the feature class before geocoding the table.

The outputFieldNames parameter is a string containing a comma-delimited list of the names of the match fields in the feature class. The names of the fields must be specified in the same order as defined by the address locator. Use the MatchFields property to get the match fields for the address locator.

The fieldsToCopy parameter allows you to copy values from fields in the address table to the feature class. To copy a field, add a property to the PropertySet with the name of the destination field in the feature class, and with a value of the name of the field in the address table. You must add the the field to the feature class when you create it in order to copy values from the address table.

The CancelTracker parameter allows you to optionally display the progress while the geocoding service geocodes the table of addresses.

In order to be able to rematch a geocoded feature class, you must attach a locator to the geocoded feature class.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
matchTable in interface IAddressGeocoding
Parameters:
addressTable - A reference to a com.esri.arcgis.geodatabase.ITable (in)
addressFieldNames - The addressFieldNames (in)
whereClause - The whereClause (in)
outputFeatureClass - A reference to a com.esri.arcgis.geodatabase.IFeatureClass (in)
outputFieldNames - The outputFieldNames (in)
fieldsToCopy - A reference to a com.esri.arcgis.system.IPropertySet (in)
cancelTracker - A reference to a com.esri.arcgis.system.ITrackCancel (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
ILocatorManager2, IAddressGeocoding.matchTable(com.esri.arcgis.geodatabase.ITable, String, String, com.esri.arcgis.geodatabase.IFeatureClass, String, com.esri.arcgis.system.IPropertySet, com.esri.arcgis.system.ITrackCancel), AttachedLocator, ILocatorAttach2, IAttachedLocator, IAdvancedGeocoding.rematchTable(com.esri.arcgis.geodatabase.ITable, String, String, com.esri.arcgis.geodatabase.IFeatureClass, String, String, String, com.esri.arcgis.system.ITrackCancel), ILocatorManager, LocatorManager, IAddressGeocoding.matchAddress(com.esri.arcgis.system.IPropertySet), IAddressGeocoding, ILocatorAttach2.attachLocator(com.esri.arcgis.geodatabase.ILocator, com.esri.arcgis.geodatabase.ITable, String, String)

validate

public void validate()
              throws IOException,
                     AutomationException
Checks that the locator properties and locator dataset are present and valid.

Remarks

The Validate method allows you to check that the locator is ready to be used. This method checks if the locator properties and locator dataset are present and valid.

This method preloads all locators referenced by a composite locator. Use this method to optimize performance as locators are loaded on application startup, so that the first geocoding operation will run quickly.

This method returns a value of True if the locator is valid, and returns an error if it is not.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
validate in interface IAddressGeocoding
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
GeocodingIndexObject, GeocodingIndexClassExtension, IReferenceDataTable.getGeocodingIndexes(), ReferenceDataIndex, IReferenceDataFieldEdit, ReferenceDataFieldsEnumerator, IGeocodingIndexCompute, ReferenceDataTableEnumerator, IReferenceDataField, IReferenceDataTableEdit, ESRIFDOAddressLocator, IReferenceDataFile.getPathName(), StreetMapAddressLocator, IEnumReferenceDataField, IReferenceDataFile, IReferenceDataTable, IReferenceDataTables, IReferenceDataTables.getTables(), ReferenceDataField, IReferenceDataFile.getFilters(), IEnumReferenceDataTable, IReferenceDataIndex, IReferenceDataIndexEdit, ReferenceDataTable, IAddressGeocoding.validate(), ReferenceDataIndexEnumerator, IEnumReferenceDataIndex

getCandidateFields

public IFields getCandidateFields()
                           throws IOException,
                                  AutomationException
Fields contained in a list of candidates.

Remarks

When an address locator generates a set of match candidates for an address, the candidates are described by a certain set of candidate fields. Each style of address locator has its own set of candidate fields.

You can use the fields returned by this property to inspect candidates found using the FindAddressCandidates method.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getCandidateFields in interface IAddressCandidates
Returns:
A reference to a com.esri.arcgis.geodatabase.IFields
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
IAddressCandidates

findAddressCandidates

public IArray findAddressCandidates(IPropertySet address)
                             throws IOException,
                                    AutomationException
Generates candidates for an address.

Remarks

The address parameter is a PropertySet that contains one property for each of the address fields defined by the address locator. You can use the IAddressInputs::AddressFields method to get the address fields for a address locator.

This method returns an Array of PropertySets. Each PropertySet in the Array has properties specified by the CandidateFields property.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
findAddressCandidates in interface IAddressCandidates
Parameters:
address - A reference to a com.esri.arcgis.system.IPropertySet (in)
Returns:
A reference to a com.esri.arcgis.system.IArray
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
IAddressCandidates

findMatchingAddressCandidates

public IArray findMatchingAddressCandidates(IPropertySet address)
                                     throws IOException,
                                            AutomationException
Generates candidates for an address, including only matching ones.

Remarks

The FindMatchingAddressCandidates method is similar to the FindAddressCandidates method, with the exception that FindMatchingAddressCandidates returns only candidates with scores greater than or equal to the minimum match score for the locator.

The address parameter is a PropertySet that contains one property for each of the address fields defined by the address locator. You can use the IAddressInputs::AddressFields method to get the address fields for a address locator.

This method returns an Array of PropertySets. Each PropertySet in the Array has properties specified by the CandidateFields property.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
findMatchingAddressCandidates in interface IAddressCandidates2
Parameters:
address - A reference to a com.esri.arcgis.system.IPropertySet (in)
Returns:
A reference to a com.esri.arcgis.system.IArray
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
See Also:
IAddressCandidates

reverseGeocode

public IPropertySet reverseGeocode(IPoint location,
                                   boolean bReturnIntersection)
                            throws IOException,
                                   AutomationException
Generate an address based on a point.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
reverseGeocode in interface IReverseGeocoding
Parameters:
location - A reference to a com.esri.arcgis.geometry.IPoint (in)
bReturnIntersection - The bReturnIntersection (in)
Returns:
A reference to a com.esri.arcgis.system.IPropertySet
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getSearchDistance

public double getSearchDistance()
                         throws IOException,
                                AutomationException
Search distance.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getSearchDistance in interface IReverseGeocodingProperties
Returns:
The searchDistance
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setSearchDistance

public void setSearchDistance(double searchDistance)
                       throws IOException,
                              AutomationException
Search distance.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setSearchDistance in interface IReverseGeocodingProperties
Parameters:
searchDistance - The searchDistance (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getSearchDistanceUnits

public int getSearchDistanceUnits()
                           throws IOException,
                                  AutomationException
Units used for the search distance.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getSearchDistanceUnits in interface IReverseGeocodingProperties
Returns:
A com.esri.arcgis.system.esriUnits constant
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setSearchDistanceUnits

public void setSearchDistanceUnits(int searchDistanceUnits)
                            throws IOException,
                                   AutomationException
Units used for the search distance.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setSearchDistanceUnits in interface IReverseGeocodingProperties
Parameters:
searchDistanceUnits - A com.esri.arcgis.system.esriUnits constant (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getIntersectionCandidateFields

public IFields getIntersectionCandidateFields()
                                       throws IOException,
                                              AutomationException
Fields contained by intersection candidates.

Remarks

The IntersectionCandidateFields property returns a Fields object that specifies the fields that are contained by candidates for intersection addresses. You can use these fields to inspect the candidates that the locator generates for an address.

Use the IsIntersection method to determine if an address is an intersection address.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getIntersectionCandidateFields in interface IIntersectionGeocoding
Returns:
A reference to a com.esri.arcgis.geodatabase.IFields
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isIntersection

public boolean isIntersection(IPropertySet address)
                       throws IOException,
                              AutomationException
Indicates if an address is an intersection.

Remarks

Use the IsIntersection property to determine if an address specifies an intersection. If an address does specify an intersection, use the fields returned by the IntersectionCandidateFields property to inspect the candidates that the locator returns for the address.

Use the IAddressInputs::AddressFields property to determine what properties the address parameter should contain.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isIntersection in interface IIntersectionGeocoding
Parameters:
address - A reference to a com.esri.arcgis.system.IPropertySet (in)
Returns:
The isAnIntersection
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getMinimumMatchScore

public int getMinimumMatchScore()
                         throws IOException,
                                AutomationException
Minimum match score setting.

Remarks

The MinimumMatchScore property specifies how well addresses have to match their most likely candidate in the reference data in order to be considered matched. A perfect match yields a score of 100. A match score between 75 and 100 can generally be considered a good match, depending upon the quality of your reference and address data. An address with no candidates with scores euqal to or greater than the minimum match score will not be matched.

The MinimumMatchScore property can have values between 0 and 100. If your application demands that addresses be located with a high level of confidence, you should specify a high value. If you want to maximize the number of addresses that can be matched and don’t mind if some addresses are potentially matched incorrectly, you can use a lower value.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getMinimumMatchScore in interface IGeocodingProperties
Returns:
The minimumMatchScore
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setMinimumMatchScore

public void setMinimumMatchScore(int minimumMatchScore)
                          throws IOException,
                                 AutomationException
Minimum match score setting.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setMinimumMatchScore in interface IGeocodingProperties
Parameters:
minimumMatchScore - The minimumMatchScore (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getMinimumCandidateScore

public int getMinimumCandidateScore()
                             throws IOException,
                                    AutomationException
Minimum candidate score setting.

Remarks

Locators use the MinimumCandidateScore setting to filter the set of candidates that are returned by the IAddressCandidates::FindAddressCandidates, IAdvancedGeocoding::FindStandardizedAddressCandidates, and IAdvancedIntersectionGeocoding::FindStandardizedIntersectionCandidates methods. Only candidates with a score greater than the minimum candidate score will be returned by these methods.

The minimum candidate score for a locator can have values between 0 and 100. If the Locator is unable to come up with any likely candidates for an address that you want to geocode, you can specify a lower value so that candidates with very low scores are considered.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getMinimumCandidateScore in interface IGeocodingProperties
Returns:
The minimumCandidateScore
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setMinimumCandidateScore

public void setMinimumCandidateScore(int minimumCandidateScore)
                              throws IOException,
                                     AutomationException
Minimum candidate score setting.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setMinimumCandidateScore in interface IGeocodingProperties
Parameters:
minimumCandidateScore - The minimumCandidateScore (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getSpellingSensitivity

public int getSpellingSensitivity()
                           throws IOException,
                                  AutomationException
Spelling sensitivity setting.

Remarks

The SpellingSensitivity property controls how much variation the locator will allow when it searches for likely candidates in the reference data. A low value for spelling sensitivity will allow “Mane”, “Maine”, and “Man” to be treated as match candidates for “Main”. A higher value will restrict candidates to exact matches. The spelling sensitivity does not affect the match score of each candidate; it only controls how many candidates the locator considers. The locator then computes the match score of each candidate and ranks the candidates by score.

The SpellingSensitivity property can have values between 0 and 100. If you are sure that your addresses are spelled correctly, you can specify a higher value for the SpellingSensitivity. However, if you think that your addresses may contain spelling errors, then you should specify a lower value.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getSpellingSensitivity in interface IGeocodingProperties
Returns:
The spellingSensitivity
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setSpellingSensitivity

public void setSpellingSensitivity(int spellingSensitivity)
                            throws IOException,
                                   AutomationException
Spelling sensitivity setting.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setSpellingSensitivity in interface IGeocodingProperties
Parameters:
spellingSensitivity - The spellingSensitivity (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getEndOffset

public int getEndOffset()
                 throws IOException,
                        AutomationException
End offset percentage.

Remarks

Locators that use polyline features as reference data interpolate positions along reference data features for geocoded addresses. In order to prevent features that are located at the end of a reference data feature from falling on top of other features (for example, a cross street), the locator can apply a “squeeze factor”, or end offset, to the location of a geocoded address.

The EndOffset property specifies by what amount to offset geocoded locations from the end of reference data features, and is expressed as a percentage of the length of the reference feature, between 0 percent and 50 percent. An EndOffset value of 0 will not offset features from the end of the reference feature. An EndOffset value of 50 percent will locate all geocoded addresses at the middle of the reference feature.

Warning: Do not use EndOffset in combination with EndOffsetDistanceUnits from IGeocodingProperties2 because it may produce some unexpected results. Use EndOffsetDistance in combination with EndOffsetDistanceUnits instead.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getEndOffset in interface IGeocodingProperties
Returns:
The endOffset
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setEndOffset

public void setEndOffset(int endOffset)
                  throws IOException,
                         AutomationException
End offset percentage.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setEndOffset in interface IGeocodingProperties
Parameters:
endOffset - The endOffset (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getSideOffset

public double getSideOffset()
                     throws IOException,
                            AutomationException
Side offset distance.

Remarks

Some locators support geocoding addresses to a particular side of a street. For those locators, you can specify a side offset using the SideOffset property, which specifies how far from the correct side of the street geocoded addresses should be offset. The SideOffsetUnits property specifies the units for the side offset.

You can use these properties to improve the cartographic appearance of your geocoded feature classes. By default, the value of the SideOffsetUnits property is esriUnknownUnits, which indicates to use the reference data’s units.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getSideOffset in interface IGeocodingProperties
Returns:
The sideOffset
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setSideOffset

public void setSideOffset(double sideOffset)
                   throws IOException,
                          AutomationException
Side offset distance.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setSideOffset in interface IGeocodingProperties
Parameters:
sideOffset - The sideOffset (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getSideOffsetUnits

public int getSideOffsetUnits()
                       throws IOException,
                              AutomationException
Units used for the side offset.

Remarks

Some locators support geocoding addresses to a particular side of a street. For those locators, you can specify a side offset using the SideOffset property, which specifies how far from the correct side of the street geocoded addresses should be offset. The SideOffsetUnits property specifies the units for the side offset.

You can use these properties to improve the cartographic appearance of your geocoded feature classes. By default, the value of the SideOffsetUnits property is esriUnknownUnits, which indicates to use the reference data’s units.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getSideOffsetUnits in interface IGeocodingProperties
Returns:
A com.esri.arcgis.system.esriUnits constant
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setSideOffsetUnits

public void setSideOffsetUnits(int sideOffsetUnits)
                        throws IOException,
                               AutomationException
Units used for the side offset.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setSideOffsetUnits in interface IGeocodingProperties
Parameters:
sideOffsetUnits - A com.esri.arcgis.system.esriUnits constant (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isAddXYCoordsToMatchFields

public boolean isAddXYCoordsToMatchFields()
                                   throws IOException,
                                          AutomationException
Indicates if the x and y coordinates of the address location are included in the geocoding result.

Remarks

The AddXYCoordsToMatchFields property indicates if the matches returned by the locator have attributes representing the x and y coordinates of the geocoded locations. If this property has a value of True, then the locator will return two additional attributes for matches — one each for the x and y coordinates of the geocoded features. These attributes will be included in the match fields for the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isAddXYCoordsToMatchFields in interface IGeocodingProperties
Returns:
The bAddXYCoordsToMatchFields
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setAddXYCoordsToMatchFields

public void setAddXYCoordsToMatchFields(boolean bAddXYCoordsToMatchFields)
                                 throws IOException,
                                        AutomationException
Indicates if the x and y coordinates of the address location are included in the geocoding result.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setAddXYCoordsToMatchFields in interface IGeocodingProperties
Parameters:
bAddXYCoordsToMatchFields - The bAddXYCoordsToMatchFields (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isAddStandardizeStringToMatchFields

public boolean isAddStandardizeStringToMatchFields()
                                            throws IOException,
                                                   AutomationException
Indicates if the standardized address is included in the geocoding result.

Remarks

The AddStandardizeStringToMatchFields property indicates if the matches returned by the locator have an attribute containing a string representing the standardization of the address. The standardization string is a string with each component of the standardized address separated by pipe ("|") characters. If this property has a value of True, then this attribute will be included in the match fields for the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isAddStandardizeStringToMatchFields in interface IGeocodingProperties
Returns:
The bAddStandardizeStringToMatchFields
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setAddStandardizeStringToMatchFields

public void setAddStandardizeStringToMatchFields(boolean bAddStandardizeStringToMatchFields)
                                          throws IOException,
                                                 AutomationException
Indicates if the standardized address is included in the geocoding result.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setAddStandardizeStringToMatchFields in interface IGeocodingProperties
Parameters:
bAddStandardizeStringToMatchFields - The bAddStandardizeStringToMatchFields (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isAddReferenceIDToMatchFields

public boolean isAddReferenceIDToMatchFields()
                                      throws IOException,
                                             AutomationException
Indicates if the feature ID of the matched feature is included in the geocoding result.

Remarks

The AddReferenceIDToMatchFields property indicates if the matches returned by the locator have an attribute containing the FeatureID of the reference data feature to which the address was matched. If this property has a value of True, then this attribute will be included in the match fields for the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isAddReferenceIDToMatchFields in interface IGeocodingProperties
Returns:
The bAddReferenceIDToMatchFields
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setAddReferenceIDToMatchFields

public void setAddReferenceIDToMatchFields(boolean bAddReferenceIDToMatchFields)
                                    throws IOException,
                                           AutomationException
Indicates if the feature ID of the matched feature is included in the geocoding result.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setAddReferenceIDToMatchFields in interface IGeocodingProperties
Parameters:
bAddReferenceIDToMatchFields - The bAddReferenceIDToMatchFields (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isAddPercentAlongToMatchFields

public boolean isAddPercentAlongToMatchFields()
                                       throws IOException,
                                              AutomationException
Indicates if the percentage along the reference feature at which the address is located is included in the geocoding result.

Remarks

For locators that interpolate geocoded locations along polyline reference data features, the AddPercentAlongToMatchFields property indicates if the matches returned by the locator have an attribute containing the percentage along the reference data feature at which the address was located, with values between 0 and 100. If this property has a value of True, then this attribute will be included in the match fields for the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isAddPercentAlongToMatchFields in interface IGeocodingProperties
Returns:
The bAddPercentAlongToMatchFields
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setAddPercentAlongToMatchFields

public void setAddPercentAlongToMatchFields(boolean bAddPercentAlongToMatchFields)
                                     throws IOException,
                                            AutomationException
Indicates if the percentage along the reference feature at which the address is located is included in the geocoding result.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setAddPercentAlongToMatchFields in interface IGeocodingProperties
Parameters:
bAddPercentAlongToMatchFields - The bAddPercentAlongToMatchFields (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isMatchIfScoresTie

public boolean isMatchIfScoresTie()
                           throws IOException,
                                  AutomationException
Indicates whether addresses should be arbitrarily matched to a feature when two or more features have the same best score.

Remarks

If the locator finds two or more candidates with the same best candidate score, and that score is greater than the minimum match score, then you can use the MatchIfCandidatesTie property to specify whether or not the locator should arbitrarily match the address to one of those candidates. If so, the locator will match the address to the first of these candidates that
it encounters.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isMatchIfScoresTie in interface IGeocodingProperties
Returns:
The bMatchIfScoresTie
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setMatchIfScoresTie

public void setMatchIfScoresTie(boolean bMatchIfScoresTie)
                         throws IOException,
                                AutomationException
Indicates whether addresses should be arbitrarily matched to a feature when two or more features have the same best score.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setMatchIfScoresTie in interface IGeocodingProperties
Parameters:
bMatchIfScoresTie - The bMatchIfScoresTie (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setDefaultInputFieldNames

public void setDefaultInputFieldNames(String addressField,
                                      Object rhs2)
                               throws IOException,
                                      AutomationException
Recognized names for a required input field.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
setDefaultInputFieldNames in interface IGeocodingProperties
Parameters:
addressField - The addressField (in)
rhs2 - A Variant (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

getIntersectionConnectors

public String getIntersectionConnectors()
                                 throws IOException,
                                        AutomationException
Connector strings used to designate intersections.

Remarks

The IntersectionConnectors property lets you specify strings that are used to delimit intersection addresses. Some address locators can geocode intersection addresses such as "New York St. & W. Redlands Blvd.". This property is a string containing all of the strings that can be used to delimit intersections (such as "&", "AND", or "AT"). Each intersection connector is separated by a space in this string.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
getIntersectionConnectors in interface IGeocodingProperties
Returns:
The intersectionConnectors
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setIntersectionConnectors

public void setIntersectionConnectors(String intersectionConnectors)
                               throws IOException,
                                      AutomationException
Connector strings used to designate intersections.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setIntersectionConnectors in interface IGeocodingProperties
Parameters:
intersectionConnectors - The intersectionConnectors (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isUseRelativePaths

public boolean isUseRelativePaths()
                           throws IOException,
                                  AutomationException
Indicates if the paths to the reference data should be stored relative to the locator.

Remarks

The UseRelativePaths property indicates if the locator stores paths to reference data sources as relative path names. Storing paths to reference data sources as relative paths names allows users to copy a locator and its reference data between folders in ArcCatalog without invalidating the locator. It also allows users to access the same locator from a shared network directory.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isUseRelativePaths in interface IGeocodingProperties
Returns:
The bUseRelativePaths
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

setUseRelativePaths

public void setUseRelativePaths(boolean bUseRelativePaths)
                         throws IOException,
                                AutomationException
Indicates if the paths to the reference data should be stored relative to the locator.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
setUseRelativePaths in interface IGeocodingProperties
Parameters:
bUseRelativePaths - The bUseRelativePaths (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

esri_clone

public IClone esri_clone()
                  throws IOException,
                         AutomationException
Clones the receiver and assigns the result to *clone.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Specified by:
esri_clone in interface IClone
Returns:
A reference to a com.esri.arcgis.system.IClone
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

assign

public void assign(IClone src)
            throws IOException,
                   AutomationException
Assigns the properties of src to the receiver.

Description

Use Assign method to assign the properties of source object to receiver object. Both objects need to have the same CLSIDs. Both source and receiver objects need to be instantiated.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
assign in interface IClone
Parameters:
src - A reference to a com.esri.arcgis.system.IClone (in)
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isEqual

public boolean isEqual(IClone other)
                throws IOException,
                       AutomationException
Indicates if the receiver and other have the same properties.

Description

IsEqual returns True if the receiver and the source have the same properties. Note, this does not imply that the receiver and the source reference the same object.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isEqual in interface IClone
Parameters:
other - A reference to a com.esri.arcgis.system.IClone (in)
Returns:
The equal
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.

isIdentical

public boolean isIdentical(IClone other)
                    throws IOException,
                           AutomationException
Indicates if the receiver and other are the same object.

Description

IsIdentical returns true if the receiver and the source reference the same object.

Product Availability

Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.

Supported Platforms

Windows, Solaris, Linux

Specified by:
isIdentical in interface IClone
Parameters:
other - A reference to a com.esri.arcgis.system.IClone (in)
Returns:
The identical
Throws:
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.