com.esri.arcgis.controls
Class ISceneControlEventsAdapter

java.lang.Object
  com.esri.arcgis.controls.ISceneControlEventsAdapter

All Implemented Interfaces:

ISceneControlEvents, Serializable, EventListener

public class ISceneControlEventsAdapter
extends Object
implements ISceneControlEvents

See Also:

Serialized Form

Constructor Summary

ISceneControlEventsAdapter()

Method Summary

void	onDoubleClick(ISceneControlEventsOnDoubleClickEvent theEvent) Fires when the user presses and releases the mouse button twice in quick succession.
void	onKeyDown(ISceneControlEventsOnKeyDownEvent theEvent) Fires after a key is pressed on the keyboard.
void	onKeyUp(ISceneControlEventsOnKeyUpEvent theEvent) Fires after a pressed key is released.
void	onMouseDown(ISceneControlEventsOnMouseDownEvent theEvent) Fires when the user presses any mouse button while over the SceneControl.
void	onMouseMove(ISceneControlEventsOnMouseMoveEvent theEvent) Fires when the user moves the mouse pointer over the SceneControl.
void	onMouseUp(ISceneControlEventsOnMouseUpEvent theEvent) Fires when the user releases a mouse button while over the SceneControl.
void	onSceneReplaced(ISceneControlEventsOnSceneReplacedEvent theEvent) Fires after the Scene contained by the SceneControl has been replaced.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

ISceneControlEventsAdapter

public ISceneControlEventsAdapter()

Method Detail

onMouseDown

public void onMouseDown(ISceneControlEventsOnMouseDownEvent theEvent)
                 throws IOException,
                        AutomationException

Fires when the user presses any mouse button while over the SceneControl.

Description

The OnMouseDown event is triggered when the user presses a mouse button on the SceneControl. Use the event to specify actions that will occur when a given mouse button is pressed.

button specifies which mouse button was pressed. 1 for the left mouse button, 2 for the right mouse button, and 4 for the middle mouse button.

shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.

x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the SceneControl (the top left hand corner).

y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the SceneControl (the top left hand corner).

Remarks

Use the win32 SetCapture function to continue receiving mouse events (until the mouse is released) when the mouse is moved outside the control's display area. The win32 ReleaseCapture function releases the mouse.

Product Availability

Available with ArcGIS Engine.

Specified by:

onMouseDown in interface ISceneControlEvents

Parameters:

theEvent - The event

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

onMouseUp

public void onMouseUp(ISceneControlEventsOnMouseUpEvent theEvent)
               throws IOException,
                      AutomationException

Fires when the user releases a mouse button while over the SceneControl.

Description

The OnMouseUp event is triggered when the user releases a mouse button on the SceneControl. Use the event to specify actions that will occur when a given mouse button is released.

button specifies which mouse button was pressed. 1 for the left mouse button, 2 for the right mouse button, and 4 for the middle mouse button.

shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.

x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the SceneControl (the top left hand corner).

y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the SceneControl (the top left hand corner).

Remarks

Use the win32 SetCapture function to continue receiving mouse events (until the mouse is released) when the mouse is moved outside the control's display area. The win32 ReleaseCapture function releases the mouse.

Product Availability

Available with ArcGIS Engine.

Specified by:

onMouseUp in interface ISceneControlEvents

Parameters:

theEvent - The event

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

onMouseMove

public void onMouseMove(ISceneControlEventsOnMouseMoveEvent theEvent)
                 throws IOException,
                        AutomationException

Fires when the user moves the mouse pointer over the SceneControl.

Description

The OnMouseMove event is triggered continually as the mouse moves over the SceneControl.

button specifies which mouse button was pressed. 1 for the left mouse button, 2 for the right mouse button, and 4 for the middle mouse button.

shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.

x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the SceneControl (the top left hand corner).

y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the SceneControl (the top left hand corner).

Product Availability

Available with ArcGIS Engine.

Specified by:

onMouseMove in interface ISceneControlEvents

Parameters:

theEvent - The event

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

onDoubleClick

public void onDoubleClick(ISceneControlEventsOnDoubleClickEvent theEvent)
                   throws IOException,
                          AutomationException

Fires when the user presses and releases the mouse button twice in quick succession.

Description

button specifies which mouse button was pressed. 1 for the left mouse button, 2 for the right mouse button, and 4 for the middle mouse button.

shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.

x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the SceneControl (the top left hand corner).

y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the SceneControl (the top left hand corner).

Remarks

The OnDoubleClick event is triggered when the user releases and presses a mouse button and then presses and releases it again on the SceneControl. If the double click does not occur within the system's double click time limit, the SceneControl will recognise another OnMouseDown event. Otherwise the event sequence is as follows:

OnMouseDown
OnMouseUp
OnDoubleClick
OnMouseUp

Product Availability

Available with ArcGIS Engine.

Specified by:

onDoubleClick in interface ISceneControlEvents

Parameters:

theEvent - The event

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

onKeyDown

public void onKeyDown(ISceneControlEventsOnKeyDownEvent theEvent)
               throws IOException,
                      AutomationException

Fires after a key is pressed on the keyboard.

Description

The OnKeyDown event is triggered when the user presses a key whilst the SceneControl has focus.

keyCode specifies a virtual key code value of the key pressed on the keyboard. For alpha-numeric keys this corresponds to the ASCII value, for example "A" key returns 65 which is the ASCII value for capital A. Other key codes are F1 to F12 are 112 to 123 respectively.

Shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.

Remarks

Some development environments will filter out keystrokes. Typically the arrow keys are used to change control focus and will not fire the OnKeyDown event. To intercept these keys use the KeyIntercept property.

Product Availability

Available with ArcGIS Engine.

Specified by:

onKeyDown in interface ISceneControlEvents

Parameters:

theEvent - The event

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

onKeyUp

public void onKeyUp(ISceneControlEventsOnKeyUpEvent theEvent)
             throws IOException,
                    AutomationException

Fires after a pressed key is released.

Description

The OnKeyUp event is triggered when when the user releases a key whilst the SceneControl has focus.

keyCode specifies a virtual key code value of the key pressed on the keyboard. For alpha-numeric keys this corresponds to the ASCII value, for example "A" key returns 65 which is the ASCII value for capital A. Other key codes are F1 to F12 are 112 to 123 respectively.

Shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.

Remarks

Some development environments will filter out keystrokes. Typically the arrow keys are used to change control focus and will not fire the OnKeyUp event. To intercept these keys use the KeyIntercept property.

Product Availability

Available with ArcGIS Engine.

Specified by:

onKeyUp in interface ISceneControlEvents

Parameters:

theEvent - The event

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.

onSceneReplaced

public void onSceneReplaced(ISceneControlEventsOnSceneReplacedEvent theEvent)
                     throws IOException,
                            AutomationException

Fires after the Scene contained by the SceneControl has been replaced.

Description

The OnSceneReplaced event is triggered whenever the ISceneControl::LoadSxFile method is used. Use this event to keep in synch with the current ISceneControl::Scene.

Product Availability

Available with ArcGIS Engine.

Specified by:

onSceneReplaced in interface ISceneControlEvents

Parameters:

theEvent - The event

Throws:

IOException - If there are interop problems.

AutomationException - If the ArcObject component throws an exception.