com.esri.arcgis.interop.Dispatch
com.esri.arcgis.controls.IARGlobeControlEventsProxy
|
|||||||||
| PREV CLASS NEXT CLASS | FRAMES NO FRAMES | ||||||||
| SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD | ||||||||
java.lang.Object
public class IARGlobeControlEventsProxy
Provides access to events that occur with interaction to the control.
IARGlobeControlEvents is the main events interface for the ArcReaderGlobeControl. Generally there is no need to explicitly set event handlers, as most development environments will automatically provide event handlers. These events allow you to programmatically listen out for specific things happening inside of the ArcReaderGlobeControl such as the mouse being pressed down.
| Field Summary | |
|---|---|
boolean |
noncastable
|
| Fields inherited from class com.esri.arcgis.interop.Dispatch |
|---|
DISPATCH_METHOD, DISPATCH_PROPERTYGET, DISPATCH_PROPERTYPUT, DISPATCH_PROPERTYPUTREF, objRef |
| Constructor Summary | |
|---|---|
|
IARGlobeControlEventsProxy()
|
|
IARGlobeControlEventsProxy(Object obj)
|
protected |
IARGlobeControlEventsProxy(Object obj,
String iid)
|
| Method Summary | |
|---|---|
void |
addListener(String iidStr,
Object theListener,
Object theSource)
|
void |
onAction(IARGlobeControlEventsOnActionEvent theEvent)
Fires when an action takes place. |
void |
onDocumentLoaded(IARGlobeControlEventsOnDocumentLoadedEvent theEvent)
Fires when a document is loaded into the control. |
void |
onDocumentUnloaded(IARGlobeControlEventsOnDocumentUnloadedEvent theEvent)
Fires when a document is unloaded from the control. |
void |
onDoubleClick(IARGlobeControlEventsOnDoubleClickEvent theEvent)
Fires when the user presses and releases any mouse button twice in quick succession, while over the globe. |
void |
onKeyDown(IARGlobeControlEventsOnKeyDownEvent theEvent)
Fires after a key is pressed on the keyboard whilst the globe has focus. |
void |
onKeyUp(IARGlobeControlEventsOnKeyUpEvent theEvent)
Fires after a pressed key is released on the keyboard whilst the globe has focus. |
void |
onMouseDown(IARGlobeControlEventsOnMouseDownEvent theEvent)
Fires when the user presses any mouse button while over the globe. |
void |
onMouseMove(IARGlobeControlEventsOnMouseMoveEvent theEvent)
Fires when the user moves the mouse pointer over the globe. |
void |
onMouseUp(IARGlobeControlEventsOnMouseUpEvent theEvent)
Fires when the user releases any mouse button while over the globe. |
void |
removeListener(String iidStr,
Object theListener)
|
| Methods inherited from class com.esri.arcgis.interop.Dispatch |
|---|
bindUsingMoniker, constructVtblPosTable, convertToNative, cookieForListener, createDispatch, createObjrefMonikerDisplayName, equals, getActiveObject, getActiveObject, getDefaultProperty, getDispatchIdOfName, getLastErrorCode, getMtsObjectContext, getObjRef, getPropertyByName, getPropertyByName, getVtblPos, hashCode, initDispatch, invoke, invokeMethodByName, invokeMethodByName, invokeMethodByName, invokePropertyGetByName, invokePropertyPutByName, invokePropertyPutByRefByName, isNativeMode, isObjRef, optimizedVtblInvoke, queryInterface, readExternal, release, setNativeMode, setPropertyByName, toString, vtblInvoke, writeExternal |
| Methods inherited from class java.lang.Object |
|---|
clone, finalize, getClass, notify, notifyAll, wait, wait, wait |
| Field Detail |
|---|
public boolean noncastable
| Constructor Detail |
|---|
public IARGlobeControlEventsProxy()
public IARGlobeControlEventsProxy(Object obj)
throws IOException
IOException
protected IARGlobeControlEventsProxy(Object obj,
String iid)
throws IOException
IOException| Method Detail |
|---|
public void addListener(String iidStr,
Object theListener,
Object theSource)
throws IOException
addListener in class com.esri.arcgis.interop.DispatchIOException
public void removeListener(String iidStr,
Object theListener)
throws IOException
removeListener in class com.esri.arcgis.interop.DispatchIOException
public void onMouseDown(IARGlobeControlEventsOnMouseDownEvent theEvent)
throws IOException,
AutomationException
The OnMouseDown event is triggered when the user presses a mouse button on the globe display area of the ArcReaderGlobeControl. Use the event to specify actions that will occur when a given mouse button is pressed.
button specifies which mouse button was pressed. 1 for the left mouse button, 2 for the right mouse button, and 4 for the middle mouse button.
shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.
x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the current view (the top left hand corner). x coordinates increase from left to right.
y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the ArcReaderGlobeControl (the top left hand corner). y coordinates increase from top to bottom.
To find the origin of the current view use ViewLeft and ViewTop properties. To convert x and y coorindates in pixels to globe units use the IARGlobe::ToSurfacePoint method.
onMouseDown in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
public void onDocumentLoaded(IARGlobeControlEventsOnDocumentLoadedEvent theEvent)
throws IOException,
AutomationException
The OnDocumentLoaded event is triggered whenever a document is loaded into the ArcReaderGlobeControl using the LoadDocument or ReloadDocument methods. It provides a mechanism for keeping track of the path and filename of the currently loaded document.
onDocumentLoaded in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
public void onDocumentUnloaded(IARGlobeControlEventsOnDocumentUnloadedEvent theEvent)
throws IOException,
AutomationException
The OnDocumentUnloaded event is triggered whenever a document is unloaded from the ArcReaderGlobeControl using the UnloadDocument or ReloadDocument methods.
onDocumentUnloaded in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
public void onMouseUp(IARGlobeControlEventsOnMouseUpEvent theEvent)
throws IOException,
AutomationException
The OnMouseUp event is triggered when the user releases a mouse button on the Globe display area of the ArcReaderGlobeControl. Use the event to specify actions that will occur when a given mouse button is released.
button specifies which mouse button was pressed. 1 for the left mouse button, 2 for the right mouse button, and 4 for the middle mouse button.
shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.
x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the current view (the top left hand corner). x coordinates increase from left to right.
y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the ArcReaderGlobeControl (the top left hand corner). y coordinates increase from top to bottom.
To find the origin of the current view use ViewLeft and ViewTop properties. To convert x and y coorindates in pixels to globe units use the IARGlobe::GetSurfacePoint method.
onMouseUp in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
public void onMouseMove(IARGlobeControlEventsOnMouseMoveEvent theEvent)
throws IOException,
AutomationException
The OnMouseMove event is triggered continually as the mouse moves over the Globe display area of the ArcReaderGlobeControl.
button specifies which mouse button was pressed. 1 for the left mouse button, 2 for the right mouse button, and 4 for the middle mouse button.
shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.
x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the current view (the top left hand corner). x coordinates increase from left to right.
y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the ArcReaderGlobeControl (the top left hand corner). y coordinates increase from top to bottom.
To find the origin of the current view use ViewLeft and ViewTop properties. To convert x and y coordinates in pixels to globe units use the IARGlobe::ToSurfacePoint method.
onMouseMove in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
public void onDoubleClick(IARGlobeControlEventsOnDoubleClickEvent theEvent)
throws IOException,
AutomationException
button specifies which mouse button was pressed. 1 for the left mouse button, 2 for the right mouse button, and 4 for the middle mouse button.
shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, ShiftState would return 5.
x is the X coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the current view (the top left hand corner). x coordinates increase from left to right.
y is the Y coordinate, in pixels, where the mouse button was pressed referenced against the origin (0, 0) of the ArcReaderGlobeControl (the top left hand corner). y coordinates increase from top to bottom.
To find the origin of the current view use ViewLeft and ViewTop properties. To convert x and y coordinates in pixels to globe units use the IARGlobe::ToSurfacePoint method.
onDoubleClick in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
public void onKeyDown(IARGlobeControlEventsOnKeyDownEvent theEvent)
throws IOException,
AutomationException
The OnKeyDown event is triggered when the user presses a key whilst the globe display area of the ArcReaderGlobeControl has focus.
keyCode specifies a virtual key code value of the key pressed on the keyboard. For alpha-numeric keys this corresponds to the ASCII value, for example "A" key returns 65 which is the ASCII value for capital A. Other key codes are F1 to F12 are 112 to 123 respectively.
Shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, Shift would return 5.
onKeyDown in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
public void onKeyUp(IARGlobeControlEventsOnKeyUpEvent theEvent)
throws IOException,
AutomationException
The OnKeyUp event is triggered when the user releases a key whilst the globe display area of the ArcReaderGlobeControl has focus.
keyCode specifies a virtual key code value of the key pressed on the keyboard. For alpha-numeric keys this corresponds to the ASCII value, for example "A" key returns 65 which is the ASCII value for capital A. Other key codes are F1 to F12 are 112 to 123 respectively.
Shift specifies an integer corresponding to the state of the SHIFT (bit 0), CTRL (bit 1) and ALT (bit 2) keys. When none, some or all of these keys are pressed none, some or all the bits get set. These bits correspond to the values 1, 2, and 4, respectively. For example, if both SHIFT and ALT were pressed, Shift would return 5.
onKeyUp in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
public void onAction(IARGlobeControlEventsOnActionEvent theEvent)
throws IOException,
AutomationException
The OnAction event triggers before an action occurs with the ArcReaderGlobeControl, and provides you with a mechanism for suppressing the action from taking place or customising the action that will take place.
action indicates the type of action taking place.
data supplied as part of the action.
suppressAction specifies a boolean indicating whether the default action will be suppressed. By default the action will not be suppressed
onAction in interface IARGlobeControlEventstheEvent - The event
IOException - If there are interop problems.
AutomationException - If the ArcObject component throws an exception.
|
|||||||||
| PREV CLASS NEXT CLASS | FRAMES NO FRAMES | ||||||||
| SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD | ||||||||