Creating a keyhole based on one point

The Keyhole (One Point - Azimuth) function creates a polygon that is shaped like a keyhole based on one defined coordinate. The polygon is used to represent airspace.

Example of input and output for the Keyhole (One Point - Azimuth) function
步骤:
  1. Start ArcMap.
    提示提示:

    If the ArcMap - Getting Started dialog box appears, you can open a new or existing map document. You can also check the Do not show this dialog box in the future check box and click Open.

  2. On the menu bar, click Customize > Toolbars > Production Feature Builder.
  3. Click the Launch Feature Builder button Launch Feature Builder on the Production Feature Builder toolbar.

    The Feature Builder window appears in ArcMap.

    The Feature Builder window
    The Feature Builder window

    提示提示:

    The Feature Builder window can be placed anywhere in ArcMap, or in the TOC, with the aid of the arrows showing the possible placement positions.

  4. Choose Keyhole (One Point - Azimuth) in the list on the Functions tab.

    Feature Builder window with the Keyhole (One Point - Azimuth) function selected

  5. Define a coordinate for the start point of the polyline by doing one of the following:
    • Clicking the Pinprick button Pinprick on the Production Feature Builder toolbar, then clicking on the map
    • Typing the coordinates in the cells on the Input tab in the Coordinates area
    提示提示:

    To view the input coordinates on the map, double-click the row headers for each coordinate.

  6. Click the cell next to Radius and type a value for the radius in the selected cell.

    This is the radius of the circular part of the airspace boundary and is relative to the first input coordinate (airport reference point). The default unit is Nautical Miles.

    提示提示:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  7. Click the cell next to Azimuth and type the azimuth value.

    The azimuth is the angle at which the keyhole is going to be created. This is the azimuth from the second input coordinate. The default value is degrees.

    提示提示:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  8. Click the cell next to Azimuth Distance and type a value that represents the distance the angle should extend for the rectangular part of the keyhole.

    This is the distance from the input coordinate to which the keyhole notch is going to extend. It must therefore be greater than the radius. The default unit is Nautical Miles.

    提示提示:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  9. Click the cell next to Left Buffer and type the value for the left buffer.

    This is the width of the buffer to the left of the azimuth centerline. The default unit is Nautical Miles.

    提示提示:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  10. Click the cell next to Right Buffer and type the value for the right buffer.

    This is the width of the buffer to the right of the azimuth centerline. The default unit is Nautical Miles.

    提示提示:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  11. If necessary, click the cell next to MagVar Value and type a value for the magnetic variation.

    This can be a specified value or from a field defined in the MagVar Source parameter. The default unit is degrees.

    Learn more about the magnetic variation value

  12. 提示提示:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  13. If necessary, click the drop-down arrow next to MagVar Year and choose a different year for the World Magnetic Model.

    This is the year associated with the magnetic variation value.

    Learn more about the magnetic variation year

  14. If necessary, click the drop-down arrow next to MagVar Source and choose a source for the magnetic variation.

    This is the source of the magnetic variation value.

    Learn more about the magnetic variation source

  15. Click the Execute button Execute.

The keyhole geometry appears in the Scratch Data layer.

提示提示:

If the keyhole geometry does not appear, click the Add Scratch Data Layers button Add scratch data layers at the top of the Feature Builder window.


9/30/2010