Describes why a parameter to a method is incorrect, or why a method could not be completed.
| Constant | Value | Description |
|---|---|---|
| S_GEOMETRY_OK | 0 | |
| S_GEOMETRY_DEGENERATE | 513 | A geometric construction or geometric property query succeeded but the resulting geometry is degenerate in some way. |
| S_GEOMETRY_HAS_NL_SEGMENTS | 563 | A geometry being exported to an ESRI shapefile buffer contains non-linear segments. Some data sources cannot store non linear segments. |
| S_GEOMETRY_DATUMCONVERSIONATTEMPTED | 583 | The source and destination coordinate systems of a Project operation were different geographic systems. |
| S_GEOMETRY_EMPTY_GEOMETRY | 584 | A (successful) operation on an empty geometry was performed. Currently, only returned by GeoNormalize. |
| S_GEOMETRY_GEOMETRY_NOT_PROJECTED | 596 | The geometry could not be projected and has been set empty. This can happen when a vertical polyline lies exactly on a projection horizon line. |
| S_GEOMETRY_PROJECTION_HINT_CLIP_PCS_ONLY | 629 | Projections have to consider clipping with the PCS horizon only. |
| S_GEOMETRY_PROJECTION_HINT_CLIP_GCS_ONLY | 630 | Projections have to consider clipping with the GCS horizon only. |
| S_GEOMETRY_PROJECTION_HINT_CLIP_PCS_AND_GCS | 631 | Projections have to consider clipping with the PCS and GCS horizon. |
| E_GEOMETRY_EMPTYGEOMETRY | 514 | (0x80040202) An operation on an empty geometry was attempted - for example, trying to move or rotate one. |
| E_GEOMETRY_INCONSISTANT_PARAMS | 515 | (0x80040203) The input parameters could not be reasonably interpreted - for example, asking for the 2d result of a polyline/polygon intersection. |
| E_GEOMETRY_INVALID_RADIUS | 516 | (0x80040204) An arc construction operation was given an invalid radius. |
| E_GEOMETRY_INVALID_CHORD | 517 | (0x80040205) An arc construction operation was given an invalid chord distance. |
| E_GEOMETRY_NONENVELOPE | 518 | (0x80040206) Not used. |
| E_GEOMETRY_NONPART | 519 | (0x80040207) Not used. |
| E_GEOMETRY_ROTATEENVELOPE | 520 | (0x80040208) Envelopes cannot be rotated. |
| E_GEOMETRY_TRANSFORMENVELOPE | 521 | (0x80040209) Envelopes cannot have arbitrary transformations applied to them. |
| E_GEOMETRY_WRONGTYPE | 522 | (0x8004020a) The geometry parameter was of the wrong type for the method. |
| E_GEOMETRY_UNKNOWNTYPE | 523 | (0x8004020b) The GeometryEnvironment did not know how to create a geometry of the specified type. |
| E_GEOMETRY_UNDERCONSTRAINED | 524 | (0x8004020c) The parameters to a geometric construction did not provide enough information to complete the construction. |
| E_GEOMETRY_INVALID_ANGLE | 525 | (0x8004020d) An arc construction operation was given an invalid angle. |
| E_GEOMETRY_NONPATH | 526 | (0x8004020e) Not used. |
| E_GEOMETRY_NONSEGMENT | 527 | (0x8004020f) Not used. |
| E_GEOMETRY_NONPOINT | 528 | (0x80040210) Something other than a point was added to a multipoint. |
| E_GEOMETRY_INCONSISTANT_SPATIAL_REFERENCE | 533 | (0x80040215) Input geometries do not have same spatial reference. |
| E_GEOMETRY_PARTNOTFOUND | 535 | (0x80040217) The part could not be found in the geometry. |
| E_GEOMETRY_NOTSIMPLE | 536 | (0x80040218) The operation cannot be performed on a non-simple geometry. |
| E_GEOMETRY_INTERIORPART | 537 | (0x80040219) Not used. |
| E_GEOMETRY_BAD_SPLIT_DISTANCE | 540 | (0x8004021c) The specified splitting distance is not included in the curve to be split. |
| E_GEOMETRY_NULL | 541 | (0x8004021d) A null geometry does not correspond to any ESRI geometry type. |
| E_GEOMETRY_CANT_RESHAPE | 542 | (0x8004021e) Not used. |
| E_GEOMETRY_NONPOLYGON | 543 | (0x8004021f) Something other than a polygon was encountered. |
| E_GEOMETRY_NONPOLYLINE | 544 | (0x80040220) Something other than a polyline was encountered. |
| E_GEOMETRY_NONGEOMETRY | 545 | (0x80040221) Something other than a geometry was encountered. |
| E_GEOMETRY_EQUAL_VERTEX_ATTRIBUTES | 547 | (0x80040223) Not used. |
| E_GEOMETRY_CANT_QUERY_ON_VERTEX_ATTRIBUTES | 549 | (0x80040225) Not used. |
| E_GEOMETRY_NO_VALID_VERTEX_ATTRIBUTES | 550 | (0x80040226) Not used. |
| E_GEOMETRY_UNDEFINED_SPATIAL_REFERENCE | 551 | (0x80040227) The operation requires the presence of a spatial reference. |
| E_GEOMETRY_INCONSISTANT_DIMENSIONS | 553 | (0x80040229) Input geometries do not have same dimensions. |
| E_GEOMETRY_SIMPLIFYFAILED | 556 | (0x8004022c) Something went wrong in Polygon/Polyline simplification. |
| E_GEOMETRY_PROJECTDATUM | 558 | (0x8004022e) The project method cannot do a datum transformation directly on segments. |
| E_GEOMETRY_FILLET_FAILED | 559 | (0x8004022f) The fillet could not be constructed according to specs. |
| E_GEOMETRY_INVALID_AXES | 560 | (0x80040230) An elliptic arc construction operation was given invalid axes. |
| E_GEOMETRY_CANT_CUT_POLYGON | 561 | (0x80040231) A cut operation could not classify all parts of the polygon as being left or right of the cutting polyline. |
| E_GEOMETRY_BADRELATION | 562 | (0x80040232) The Relate operator couldn't evalute the specified relation expression. |
| E_GEOMETRY_NOT_Z_AWARE | 564 | (0x80040234) The geometry is not Z-aware. |
| E_GEOMETRY_NOT_M_AWARE | 565 | (0x80040235) The geometry is not M-aware. |
| E_GEOMETRY_SEGMENTGRAPH_CANTLOAD | 566 | (0x80040236) A SegmentGraph can only organize polyline and polygon objects. |
| E_GEOMETRY_SEGMENTGRAPH_CONSTRUCTERROR | 567 | (0x80040237) The geometries could not be topologically structured. |
| E_GEOMETRY_OUT_OF_BOUNDS | 568 | (0x80040238) The coordinates of this geometry are out of bounds. |
| E_GEOMETRY_INTERNALERROR | 569 | (0x80040239) An internal error has occurred in the geometry system. |
| E_GEOMETRY_TOOMANYPOINTS | 570 | (0x8004023a) This operation produced too many points. |
| E_GEOMETRY_BUFFEROUTOFBOUNDS | 571 | (0x8004023b) The buffer coordinates are out of bounds. |
| E_GEOMETRY_OUTOFMEMORY | 572 | (0x8004023c) There is not enough memory. |
| E_GEOMETRY_RELATIONSYNTAXERROR | 573 | (0x8004023d) The relation expression string has a syntax error. |
| E_GEOMETRY_UNKNOWNERROR | 574 | (0x8004023e) An unknown error has occurred in the geometry system. |
| E_GEOMETRY_NOPENDINGMOVETO | 575 | (0x8004023f) The SegmentGraphCursor has no unfinished MoveTo operation. |
| E_GEOMETRY_NOT_ID_AWARE | 576 | (0x80040240) The geometry is not ID-aware. |
| E_GEOMETRY_ILLEGALWIN32EXPORT | 577 | (0x80040241) Not used. |
| E_GEOMETRY_CONSTRUCTPOINTUNION | 578 | (0x80040242) Can't use ConstructUnion on a point. |
| E_GEOMETRY_BEZIER_EXTEND_EMBEDDED | 579 | (0x80040243) ExtendEmbedded not implemented for Bezier curves. |
| E_GEOMETRY_NOT_Z_SIMPLE | 580 | (0x80040244) The geometry has undefined Z values for some of its vertices. |
| E_GEOMETRY_NOT_M_SIMPLE | 581 | (0x80040245) The geometry has undefined M values for some of its vertices. |
| E_GEOMETRY_INVALIDCONSTRUCTION | 582 | (0x80040246) Not used. |
| E_GEOMETRY_NONMULTIPATCH | 585 | (0x80040249) Something other than a multipatch was encountered. |
| E_GEOMETRY_UNDEFINEDRING | 586 | (0x8004024a) The multipatch contains a ring that is invalid or has an undefined type. |
| E_GEOMETRY_INVALIDRINGTYPE | 587 | (0x8004024b) The given ring is not of the required type within the multipatch. (For example an inner ring may be used where an outer ring is required.) |
| E_GEOMETRY_AMBIGUOUSPARTTYPE | 588 | (0x8004024c) The operation would result in the creation of a new part, but the type of part to be created was ambiguous. |
| E_GEOMETRY_INVALIDRINGORDER | 589 | (0x8004024d) The ordering of rings and types is invalid. (For example, an inner ring may not have an outer ring.) |
| E_GEOMETRY_INVALIDCOUNT | 590 | (0x8004024e) The number of items specified is too high or too low in the given context. |
| E_GEOMETRY_EXTERIORPART | 591 | (0x8004024f) An interior part must be specified. |
| E_GEOMETRY_NONTRIANGLESTRIP | 592 | (0x80040250) The input interface does not belong to a triangle strip object. |
| E_GEOMETRY_NONTRIANGLEFAN | 593 | (0x80040251) The input interface does not belong to a triangle fan object. |
| E_GEOMETRY_NONVECTOR3D | 594 | (0x80040252) The input interface does not belong to a 3-dimensional vector. |
| E_GEOMETRY_DEGENERATEGEOMETRY | 595 | (0x80040253) The operation could not be performed because the geometry is degenerate. |
| E_GEOMETRY_DUPLICATESEGMENTPOINTER | 597 | (0x80040255) The same segment has been added to the geometry more than once. |
| E_GEOMETRY_INSUFFICIENT_CONTROLPOINTS | 598 | (0x80040256) The number of control points is insufficient. |
| E_GEOMETRY_NOT_BEZIERCURVES | 599 | (0x80040257) The participating segments must be Bezier curves. |
| E_GEOMETRY_TRANSFORMATION_UNDEFINED | 600 | (0x80040258) The transformation is undefined. |
| E_GEOMETRY_SR_Z_MISMATCH | 601 | (0x80040259) The geometry is z-aware, but its spatial reference has no z domain or resolution defined. |
| E_GEOMETRY_SR_M_MISMATCH | 602 | (0x8004025a) The geometry is m-aware, but its spatial reference has no m domain or resolution defined. |
| E_GEOMETRY_INPUT_TYPE_MISMATCH | 603 | (0x8004025b) The geometries are not all of the same type. |
| E_GEOMETRY_INPUT_TYPE_INCORRECT | 604 | (0x8004025c) The geometries must be polylines or polygons. |
| E_GEOMETRY_EDITED_REGIONS_OVERLAP | 605 | (0x8004025d) Cannot merge the two geometries. The edited regions overlap. |
| E_GEOMETRY_PART_ZS_ARE_NAN | 606 | (0x8004025e) A polygon part has no defined zs. |
| E_GEOMETRY_CANNOT_EXTRAPOLATE_BY_SEGMENT | 607 | (0x8004025f) No segment available to determine extrapolation ratio. |
| E_GEOMETRY_EDITS_OVERLAP | 608 | (0x80040260) Cannot merge the two geometries. The edits overlap. |
| E_GEOMETRY_UNIT_CONVERSION | 609 | (0x80040261) Cannot convert between linear and angular units. |
| E_GEOMETRY_BUFFER_DISTANCES | 610 | (0x80040262) There was a problem obtaining a distance at which to buffer a geometry. |
| E_GEOMETRY_OPERATION_CANCELLED | 611 | (0x80040263) The geometry operation was cancelled. |
| E_GEOMETRY_WRONG_RELATION_AND_TYPE | 613 | (0x80040265) The specified combination of relation and geometry types is not valid. |
| E_GEOMETRY_BUFFERCONSTRUCTION_INUSE | 614 | (0x80040266) A client has attempted to re-enter a BufferConstruction object while its ConstructBuffers... operation method executing. |
| E_GEOMETRY_BUFFERFAILURE | 615 | (0x80040267) An error occurred during the buffer operation. |
| E_GEOMETRY_TOLERANCE_TOO_LARGE_FOR_EXTENT | 616 | (0x80040268) The xy cluster tolerance was too large for the extent of the data. |
| E_GEOMETRY_BUFFER_INVALID_SIDE_OPTION | 617 | (0x80040269) The side option used by the BufferConstruction service must be one of: esriBufferLeft, esriBufferRight, esriBufferFull. |
| E_GEOMETRY_BUFFER_INVALID_END_OPTION | 618 | (0x8004026a) The end option used by the BufferConstruction service must be one of: esriBufferFlat, esriBufferRound. |
| E_GEOMETRY_BUFFER_INVALID_BUFFER_DISTANCE | 619 | (0x8004026b) The buffer distance must be a valid floating point number. |
| E_GEOMETRY_AUTHORITY_TOO_LONG | 620 | (0x8004026c) The authority parameter is too long. |
| E_GEOMETRY_WKT_TOO_LONG | 621 | (0x8004026d) The WKT(Z) parameter is too long. |
| E_GEOMETRY_PARAMETER_TOO_SMALL | 622 | (0x8004026e) An input parameter is too small. |
| E_GEOMETRY_ZM_OUT_OF_BOUNDS | 623 | (0x8004026f) The z or m coordinates of this geometry are out of bounds. |
| E_GEOMETRY_Z_OUT_OF_BOUNDS | 624 | (0x80040270) The z coordinates of this geometry are out of bounds. |
| E_GEOMETRY_M_OUT_OF_BOUNDS | 625 | (0x80040271) The m coordinates of this geometry are out of bounds. |
| E_GEOMETRY_CANNOT_DO_3D_OPERATIONS_ON_CURVES | 626 | (0x80040272) Cannot do 3D operations on curve segments. |
| E_GEOMETRY_NOT_SINGLEPART | 627 | (0x80040273) The reshaping polyline must have one part. |
| E_GEOMETRY_CANT_EVALUATE_RELATION_MATRIX | 628 | (0x80040274) Some combinations of geometries with vertical segments cannot be evaluated with a 9DEM relational expression. |
Product Availability
Available with ArcGIS Engine, ArcGIS Desktop, and ArcGIS Server.