About the parcel fabric layer
This topic applies to ArcEditor and ArcInfo only.
The parcel fabric is added as a group layer to ArcMap. A group layer organizes a set of related layers under a single layer in the table of contents in ArcMap. The group layer can be expanded or collapsed to show or hide the related sublayers. The internal feature classes that comprise a parcel fabric are represented as sublayers under the parcel fabric group layer.
The parcel fabric group layer is composed of the following set of sublayers:
- Control points
- Line points
- Points
- Lines
- Parcels
 |
Parcel fabric layer in ArcMap |
A parcel fabric group layer works just like a regular group layer in ArcMap, but layers cannot be added to, or removed from, the parcel fabric group layer.
Parcel fabric sublayers
Each sublayer of the parcel fabric layer can be queried and displayed like normal feature layers in ArcMap. You can right-click each sublayer to display its attribute table. In each sublayer's attribute table, all non-system managed attributes are editable. System-managed attributes, such as FromPointID and ToPointID on the lines table, are locked and are not editable.
Control sublayer
The control sublayer displays control points in the parcel fabric. By default, control points are displayed by their active status. A control point is active if it is checked on theControl dialog box and is connected to a fabric point. The following attributes are visible in the control sublayer attribute table:
|
Attribute field |
Description |
Editable in attribute table |
|---|---|---|
|
X |
X-coordinate; held fixed |
No |
|
Y |
Y-coordinate; held fixed |
No |
|
Z |
Z-coordinate; held fixed |
No |
|
Name |
Control point name; automatically populated if no name is specified |
No |
|
PointID |
Corresponding fabric point (A control point needs to be connected to a fabric point to be used in the fabric adjustment.) |
No |
|
AccuracyXY |
Horizontal positional accuracy; metadata only |
Yes |
|
AccuracyZ |
Vertical accuracy; metadata only |
Yes |
|
Survey Date |
The date the control point was surveyed/established |
Yes |
|
Active |
True if control point is active and can be used in a fabric adjustment |
No |
|
Type |
Used for adding subtypes |
Yes |
Line points sublayer
The line points sublayer displays line points. Line points are those parcel points that sit on the boundary lines of adjacent parcels without splitting the boundary lines. Attribute fields in the line points table are all system managed. The following attributes are visible in the line points sublayer attribute table:
|
Attribute field |
Description |
Editable in attribute table |
|---|---|---|
|
ParcelID |
ID of the parcel containing the boundary line on which the line point sits |
No |
|
FromPointID |
From-point of the boundary line on which the line point sits |
No |
|
ToPointID |
To-point of the boundary line on which the line point sits |
No |
|
LinePointID |
ID of the parcel point that is a line point |
No |
Points sublayer
The points sublayer displays parcel points in the parcel fabric. The following attributes are visible in the points sublayer attribute table:
|
Attribute field |
Description |
Editable in attribute table |
|---|---|---|
|
X |
X-coordinate; adjusted in fabric adjustment |
No |
|
Y |
Y-coordinate; adjusted in fabric adjustment |
No |
|
Z |
Z-coordinate |
No |
|
Type |
Used for adding subtypes |
Yes |
|
Category |
System-managed point type, for example, center point |
No |
|
Name |
Name of corresponding control point if there is one |
No |
|
Historical |
True if all lines sharing the point are historic |
No |
|
SystemStartDate |
Date of database transaction that created the point |
No |
|
SystemEndDate |
Date of database transaction that retired the point |
No |
|
LegalStartDate |
Date of legal transaction that created the point |
Yes |
|
LegalEndDate |
Date of legal transaction that retired the point |
Yes |
|
CenterPoint |
True if the point is a center point |
No |
|
MaxDN |
Maximum northing shift resulting from a fabric adjustment |
No |
|
MaxDE |
Maximum easting shift resulting from a fabric adjustment |
No |
Lines sublayer
The lines sublayer displays parcel boundary lines. By default, parcel lines in the lines sublayer are displayed by their line categories. The following attributes are visible in the lines sublayer attribute table:
|
Attribute field |
Description |
Editable in attribute table |
|---|---|---|
|
Calculated |
True if dimensions are inverted from shape geometry |
yes |
|
ParcelID |
ID of parcel that contains the line |
No |
|
Sequence |
Sequence order number of the line in the parcel traverse |
No |
|
FromPointID |
ID of the from-point of the line |
No |
|
ToPointID |
ID of the to-point of the line |
No |
|
Bearing |
Direction of the line |
No |
|
Distance |
Length of the line |
No |
|
Type |
Used for adding subtypes |
Yes |
|
Category |
Category of the line, for example, connection or radial line |
Yes |
|
Radius |
Curved line parameter |
No |
|
ArcLength |
Curved line parameter |
No |
|
Delta |
Curved line parameter |
No |
|
CenterPointID |
ID of the point that is the center point of the curve |
No |
|
Historical |
True if the line's associated parcel is historic |
No |
|
Radial Bearing |
Bearing of a radial line generated by a curved line |
No |
|
Tangent Bearing |
Bearing of the curve tangent |
No |
|
Line Parameters |
Specifies whether line is curved or straight |
No |
|
Accuracy |
Accuracy level of the line |
Yes |
|
ComputedMinusObserved |
Difference between the distance of the recomputed line shape from the least-squares adjustment and the recorded distance |
No |
|
Internal Angle |
Populated when parcel traverse is defined from internal angles instead of bearings |
No |
|
Reference Object |
Populated when parcel traverse is defined from internal angles instead of bearings |
No |
|
IsMajor |
System-managed field, reserved for storing curves greater than 180 degrees |
No |
|
Hide |
True if line dimension is duplicate of overlapping line (Duplicate label will be hidden.) |
Yes |
|
SystemStartDate |
Date of database transaction that created the line |
No |
|
SystemEndDate |
Date of database transaction that retired the line |
No |
|
LegalStartDate |
Date of legal transaction that created the line |
Yes |
|
LegalEndDate |
Date of legal transaction that retired the line |
Yes |
|
DensifyType |
System-managed field used for storage of natural boundaries |
No |
Parcels sublayer
The parcels sublayer displays the parcel polygons. The following attributes are visible in the parcels sublayer attribute table:
|
Attribute field |
Description |
Editable in attribute table |
|---|---|---|
|
Joined |
True if the parcel is joined to the fabric |
No |
|
PlanID |
ID of the parcel's associated plan |
No |
|
Name |
Parcel name or parcel identification number (PIN) |
Yes |
|
Type |
Used for adding subtypes |
Yes |
|
Stated Area |
Area of parcel polygon; automatically calculated if misclose is small; can be edited to reflect recorded plan value |
Yes |
|
Compiled |
True if parcel polygon is generated from inverted dimensions |
Yes |
|
Historical |
True if parcel is historic; automatically true if Construct from parent or Merge is used |
No |
|
SystemStartDate |
Date of the database transaction that created the polygon |
No |
|
SystemEndDate |
Date of the database transaction that retired the polygon |
No |
|
LegalStartDate |
Date of the legal transaction that created the parcel; should match the plan date |
Yes |
|
LegalEndDate |
Date of the legal transaction that retired the parcel; should correspond to the plan date of the replacing parcel(s) |
Yes |
|
GroupID |
Populated with an ID if the parcel is part of an unjoined group |
No |
|
Accuracy |
Accuracy level of the parcel |
Yes |
|
Rotation |
Automatically calculated from the joining process |
No |
|
Scale |
Automatically calculated from the joining process |
No |
|
Unclosed |
True if the parcel is an unclosed polygon |
No |
|
MiscloseRatio |
Ratio of parcel misclose distance to parcel perimeter; system managed |
No |
|
Misclose Bearing |
Bearing needed to close the parcel; system managed |
No |
|
Construction |
True if the parcel is a construction; system managed |
No |
|
ShapeStdErrorE |
Easterly shift/distortion in parcel shape after fabric adjustment; system managed |
No |
|
ShapeStdErrorN |
Northerly shift/distortion in parcel shape after fabric adjustment; system managed |
No |
|
BacksightBearing |
Populated when parcel is defined from internal angles instead of bearing |
No |
Symbolizing the parcel fabric layer
When a parcel fabric layer is loaded into ArcMap, the Points and LinePoints layers are turned off for display simplicity.
Parcel fabric sublayers layers behave in the same way as normal feature class layers and can be turned on and off at any time by clicking the check boxes next to each sublayer. Parcel fabric sublayers can be symbolized, identified, and labeled like regular layers in ArcMap. For example, the lines sublayer can be displayed by line type, and the parcels sublayer can be queried by parcel PIN.
Querying and displaying the parcel fabric layer
The parcel fabric group layer allows powerful query and display of the parcel fabric. Because parcel fabric feature classes and tables are internally related to each other, the parcel fabric sublayers can be queried with respect to each other. For example, parcels can be queried by their related lines. The following list describes some examples of querying parcels in the parcel fabric:
- Parcels can be queried and displayed by plan (record of survey).
- Parcels can be queried and displayed by line type, for example, road frontage or back lot boundary.
- Parcels can be queried and displayed by accuracy level.
- Parcels can be queried and displayed by their misclose information, such as MiscloseRatio and MiscloseDistance.